Publications
"Wireless Power Transfer Systems Using Metamaterials: A Review", IEEE Access, vol. 8, pp. 147930 - 147947, Jan-01-2020.
, "Tunable Metamaterial Slab for Efficiency Improvement in Misaligned Wireless Power Transfer", IEEE Microwave and Wireless Components Letters, vol. 30, issue 9, pp. 912 - 915, Jan-09-2020.
, "Three dimensional metal pattern transfer for replica molded microstructures", Applied Physics Letters, vol. 94, no. 2, 2009.
, "A Thermal Microjet System with Tapered Micronozzles Fabricated by Inclined UV Lithography for Transdermal Drug Delivery", Journal of Micromechanics and Microengineering, vol. 21, 2011.
, "Subwavelength direct laser patterning of conductive gold nanostructures by simultaneous photopolymerization and photoreduction", ACS Nano, vol. 5 (3), 2011.
, "Study on high throughput nanomanufacturing of photopatternable nanofibers using tube nozzle electrospinning with multi-tubes and multi-nozzles", Micro and Nano Systems Letters, vol. 5, issue 1, Jan-27-2017.
, "Study on Cu/Ni Nano Superlattice Conductors for Reduced RF Loss", IEEE Microwave and Wireless Components Letters, vol. 26, issue 4, pp. 258 - 260, Jan-04-2016.
, "Screen-Printable, Self-Biased SrM/PDMS Composites for Integrated Magnetic Microwave Devices", IEEE Transactions on Magnetics, vol. 57, issue 10, pp. 1 - 5, Jan-10-2021.
, "Scale of Carbon Nanomaterials Affects Neural Outgrowth and Adhesion", IEEE Transactions on NanoBioscience, vol. 15, issue 1, pp. 11 - 18, Jan-01-2016.
, "Rollable metamaterial screen for magnetic resonance coupling-based high-efficiency wireless power transferAbstract", International Journal of Microwave and Wireless Technologies, vol. 13, issue 4, pp. 365 - 373, Jan-05-2021.
, "Patterning of thick electroplated CoPt magnets using SU-8 micromoulds", Micro & Nano Letters, vol. 14, issue 14, pp. 1393 - 1396, Jun-12-2020, 2019.
, "A Passive Wireless Microelectromechanical Pressure Sensor for Harsh Environments", Journal of Microelectromechanical Systems, vol. 27, issue 1, pp. 73 - 85, Jan-02-2018.
, "Nonlinear sensitivity enhancement of resonant microsensors and its application to low power magnetic sensing", Journal of Micromechanics and Microengineering, vol. 21, 2011.
, "Mutual Coupling Reduction Using Micromachined Complementary Meander-Line Slots for a Patch Array Antenna", IEEE Antennas and Wireless Propagation Letters, vol. 16, pp. 1667 - 1670, Feb-02-2017.
, "Microworld: United We Stand", Lab on a Chip, vol. 10, 2010.
, "Large-Area, Near-Infrared (IR) Photonic Crystals with Colloidal Gold Nanoparticles Embedding", ACS Applied Materials and Interfaces, vol. 2, 2010.
, "Kinematically Stabilized Microbubble Actuator Arrays", Journal of Microelectromechanical Systems, vol. 17, issue 1, pp. 124 - 132, 02/2008.
, "Investigation of Ferromagnetic Resonance Shift in Screen-Printed Barium Ferrite/Samarium Cobalt Composites", IEEE Transactions on Microwave Theory and Techniques, vol. 67, issue 8, pp. 3230 - 3236, Jan-08-2019.
, "Hybrid Electrospun Polycaprolactone Mats Consisting of Nanofibers and Microbeads for Extended Release of Dexamethasone", Pharmaceutical Research, vol. 33, issue 6, pp. 1509 - 1516, Jan-06-2016.
, "Fabrication and Characterization of Gold-Polymer Nanocomposite Plasmonic Nanoarrays in a Porous Alumina Template", ACS Nano, vol. 4, 2010.
, "Fabrication and characterization of advanced through glass via interconnects", International Symposium on Microelectronics, vol. 2016, issue 1, pp. 000288 - 000292, Feb-10-2016.
, "Experimental demonstration of multi-watt wireless power transmission to ferrite-core receivers at 6.78 MHz", Wireless Power Transfer, vol. 6, issue 1, pp. 17 - 25, Jan-03-2019.
, "An electrically active mironeedle array for electroporation", Biomedical Microdevices, vol. 12, no. 2, 2010.
, "Development of a Spatially Resolved 3He Quasi-Particle Detector", Journal of Low Temperature Physics, vol. 183, issue 3-4, pp. 307 - 312, Jan-05-2016.
, "Computer-controlled dynamic mode multidirectional UV lithography for 3D microfabrication", Journal of Micromechanics and Microengineering, vol. 21 (3), 2011.
,