Publications

Found 1223 results
[ Author(Desc)] Title Type Year
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 
A
Acosta, M. A., X. Jiang, P-K. Huang, K. B. Cutler, C. S. Grant, G. M. Walker, and M. P. Gamcsik, "A microfluidic device to study cancer metastasis under chronic and intermittent hypoxia", Biomicrofluidics, vol. 8, issue 5, pp. 054117, 09/2014.
Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, IUTAM Symposium on Flow Control and MEMS, vol. 7: Springer, pp. 25-32, Notice: Undefine, 2008.
Agashe, J., and D. P. Arnold, "A study of scaling and geometry effects on the forces between cuboidal and cylindrical magnets using analytical force solutions", J. Phys. D: Appl. Phys., vol. 41, no. 10, pp. 105001-1–105001-9, MAY, 2008.
Agashe, J., M. Sheplak, D. P. Arnold, and L. Cattafesta, "MEMS-based actuators for flow-control applications", IUTAM Symposium on Flow Control and MEMS: Springer, pp. 25-32, 09/2006.
Agashe, J., D. P. Arnold, and L. Cattafesta, "Development of Compact Electrodynamic Zero-Net Mass-Flux Actuators", 47th AIAA Aerospace Sciences Meeting, Orlando, FL, 01/2009.
Aghoram, U., V. Anantharam, M. He, K. Natarajan, H. Xie, and M. P. Frank, "Driving Fully-Adiabatic Logic Circuits Using Custom High-Q MEMS Resonators", Proceedings of the 2004 International Conference on Embedded Systems and Applications (ESA’04), Las Vegas, Nevada, USA, 2004.
Ahn, H., C. Kim, J. Kim, D. Senior, and Y.K. Yoon, "Electromechanically Steerable Directional Antenna with Floating Pillar Array", 2010 IEEE International Symposium Antennas and Propagation and CNC/USNC/URSI Radio Science Meeting, Toronto, ON, Canada, IEEE, pp. 1 - 4, 07/2010.
Albertani, R., P. Khambatta, A. Hart, L. Ukeiley, M. Oyarzun, L. Cattafesta, and G. Abate, "Validation of a Low Reynolds Number Aerodynamic Characterization Facility", 47th AIAA Aerospace Sciences Meeting, AIAA Paper 2009-0880, January, 2009.
Alipanahrostami, M., X. Jiang, C. Manzanas, J. C. Loeb, M. Pan, T. B. Tilly, J. A. Lednicky, C-Y. Wu, and H. Z. Fan, "Integration of Sample Preparation with RNA Amplification Device for Influenza Virus Detection", International Conference on Miniaturized Systems for Chemistry and Life Sciences (µTAS), pp. 37-38, 2021.
Alizadehghobadi, S., H. Biglari, H. Niroomand-Oscuii, and M. Habibimatin, "Numerical study of hemodynamics in a complete coronary bypass with venous and arterial grafts and different degrees of stenosis", Computer Methods in Biomechanics and Biomedical Engineering, pp. 1 - 14, Dec-12-2020.
Alvi, F., and L. Cattafesta, "The art and science of flow control – case studies using flow visualization methods", The European Physical Journal - Special Topics, vol. 182, issue 1, pp. 97-112, 04/2010.
Appukuttan, A., W. Shyy, M. Sheplak, and L. Cattafesta, "Mixed Convection Induced by MEMS-Based Thermal Shear Stress Sensors", Numerical Heat Transfer-A, vol. 43, no. 3, pp. 283-305, JUL, 2003.
Aram, E., R. Mittal, J. Griffin, and L. Cattafesta, "Towards Effective ZNMF Jet Based Control of a Canonical Separated Flow", 5th AIAA Flow Control Conference, Chicago, IL, AIAA, 06/2010.
Aram, E., R. Mittal, and L. Cattafesta, "Toward Simple Boundary Condition Representations of Zero-Net Mass-Flux Actuators in Grazing Flow", 39th AIAA Fluid Dynamics Conference, AIAA Paper 2009-4018, San Antonio, TX, June, 2009.
Aram, E., R. Mittal, and L. Cattafesta, "Simple Representations of Zero-Net Mass-Flux Jets in Grazing Flow for Flow-Control Simulations", International Journal of Flow Control, vol. 2, issue 2, pp. 109 - 125, 06/2010.
Arnold, D. P., S. Das, F. Cros, I. Zana, J. H. Lang, and M. G. Allen, "Magnetic induction machines embedded in fusion-bonded silicon", Tech. Dig. Solid-State Sensor, Actuator, and MicrosystemsWorkshop (Hilton Head 2004), pp. 129-132, June, 2004.
Arnold, D. P., H. Burch, M. Mitchell, A. Garraud, and R. Moore, "Spinning magnets: an unconventional method for compact generation of ELF radio signals", IEEE AP-S/URSI, San Diego, CA, 2017.
Arnold, D. P., S. Das, J. Park, I. Zana, J. H. Lang, and M. G. Allen, "Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part II: design, fabrication, and testing", J. Microelectromech. Syst., vol. 15, no. 5, pp. 1351-1363, OCT, 2006.
Arnold, D. P., I. Zana, and M. G. Allen, "Analysis and optimization of vertically oriented, throughwafer, laminated magnetic cores in silicon", J. Micromech. Microeng, vol. 15, no. 5, pp. 971-977, MAY, 2005.
Arnold, D. P., S. Das, F. Cros, I. Zana, J. H. Lang, and M. G. Allen, "Magnetic induction machines integrated into bulk-micromachined silicon", J. Microelectromech. Syst., vol. 15, no. 2, pp. 406-414, APR, 2006.
Arnold, D. P., T. Nishida, L. Cattafesta, and M. Sheplak, "MEMS-Based Acoustic Array Technology", 40th Aerospace Sciences Meeting and Exhibit, AIAA Paper 2002-0253, Reno, NV, January, 2002.
Arnold, D. P., F. Cros, I. Zana, D. Veazie, and M. G. Allen, "Electroplated metal microstructures embedded in fusion-bonded silicon: conductors and magnetic materials", J. Microelectromech. Syst., vol. 13, no. 5, pp. 791-798, OCT, 2004.
Arnold, D. P., F. Herrault, I. Zana, P. Galle, J. Park, S. Das, J. H. Lang, and M. G. Allen, "Design optimization of an 8-Watt, microscale, axial-flux, permanent-magnet generator", J. Micromech. Microeng., vol. 16, no. 9, pp. s290-s296, SEP, 2006.
Arnold, D. P., P. Galle, F. Herrault, S. Das, J. H. Lang, and M. G. Allen, "A self-contained, flow-powered microgenerator system", Tech. Dig. 5th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2005), Tokyo, Japan, pp. 113-115, November, 2005.
Arnold, D. P., I. Zana, F. Cros, and M. G. Allen, "Vertically-laminated magnetic cores by electroplating Ni-Fe into micromachined Si", IEEE Trans. Magn., vol. 40, no. 4, pp. 3060-3062, JUL, 2004.