Publications
"A microfluidic device to study cancer metastasis under chronic and intermittent hypoxia", Biomicrofluidics, vol. 8, issue 5, pp. 054117, 09/2014.
, "Development of Compact Electrodynamic Zero-Net Mass-Flux Actuators", 47th AIAA Aerospace Sciences Meeting, Orlando, FL, 01/2009.
, IUTAM Symposium on Flow Control and MEMS, vol. 7: Springer, pp. 25-32, Notice: Undefine, 2008.
, "A study of scaling and geometry effects on the forces between cuboidal and cylindrical magnets using analytical force solutions", J. Phys. D: Appl. Phys., vol. 41, no. 10, pp. 105001-1–105001-9, MAY, 2008.
, "MEMS-based actuators for flow-control applications", IUTAM Symposium on Flow Control and MEMS: Springer, pp. 25-32, 09/2006.
, "Driving Fully-Adiabatic Logic Circuits Using Custom High-Q MEMS Resonators", Proceedings of the 2004 International Conference on Embedded Systems and Applications (ESA’04), Las Vegas, Nevada, USA, 2004.
, "Electromechanically Steerable Directional Antenna with Floating Pillar Array", 2010 IEEE International Symposium Antennas and Propagation and CNC/USNC/URSI Radio Science Meeting, Toronto, ON, Canada, IEEE, pp. 1 - 4, 07/2010.
, "Validation of a Low Reynolds Number Aerodynamic Characterization Facility", 47th AIAA Aerospace Sciences Meeting, AIAA Paper 2009-0880, January, 2009.
, "Integration of Sample Preparation with RNA Amplification Device for Influenza Virus Detection", International Conference on Miniaturized Systems for Chemistry and Life Sciences (µTAS), pp. 37-38, 2021.
, "Numerical study of hemodynamics in a complete coronary bypass with venous and arterial grafts and different degrees of stenosis", Computer Methods in Biomechanics and Biomedical Engineering, pp. 1 - 14, Dec-12-2020.
, "The art and science of flow control – case studies using flow visualization methods", The European Physical Journal - Special Topics, vol. 182, issue 1, pp. 97-112, 04/2010.
, "Mixed Convection Induced by MEMS-Based Thermal Shear Stress Sensors", Numerical Heat Transfer-A, vol. 43, no. 3, pp. 283-305, JUL, 2003.
, "Toward Simple Boundary Condition Representations of Zero-Net Mass-Flux Actuators in Grazing Flow", 39th AIAA Fluid Dynamics Conference, AIAA Paper 2009-4018, San Antonio, TX, June, 2009.
, "Simple Representations of Zero-Net Mass-Flux Jets in Grazing Flow for Flow-Control Simulations", International Journal of Flow Control, vol. 2, issue 2, pp. 109 - 125, 06/2010.
, "Towards Effective ZNMF Jet Based Control of a Canonical Separated Flow", 5th AIAA Flow Control Conference, Chicago, IL, AIAA, 06/2010.
, "Permanent Magnets for MEMS", J. Microelectromech. Syst., vol. 18, no. 6, pp. 1255-1266, 12/2009.
, "Vertically-laminated magnetic cores by electroplating Ni-Fe into micromachined Si", IEEE Trans. Magn., vol. 40, no. 4, pp. 3060-3062, JUL, 2004.
, "Second-generation, silicon-based magnetic induction machines for microengine power generation", Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, Washington, DC, May, 2004.
, "Fabrication of Microscale Rotating Magnetic Machines", Multi-Wafer Rotating MEMS Machines: Turbines, Generators, and Engines, New York, Springer, 2009.
, "Review of microscale magnetic power generation", IEEE Trans. Magn., vol. 43, no. 11, pp. 3940-3951, NOV, 2007.
, "Optimization of a microscale, axial-flux, permanent-magnet generator", Tech. Dig. 5th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2005), Tokyo, Japan, pp. 165-168, November, 2005.
, "A directional acoustic array using silicon micromachined piezoresistive microphones", J. Acous. Soc. Amer., vol. 113, no. 1, pp. 289-298, JAN, 2003.
, "Materials and fabrication methods for high-temperature micro-magnetic machines for micro-turbine power generation", Proc. Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, College Park, MD, pp. 77-81, April, 2003.
, "A Piezoresistive Microphone for Aeroacoustic Measurements", Proc. of ASME IMECE 2001, International Mechanical Engineering Congress and Exposition, Paper MEMS-23841, vol. 2, New York, NY, November, 2001.
, "Magnetic induction machines embedded in fusion-bonded silicon", Tech. Dig. Solid-State Sensor, Actuator, and MicrosystemsWorkshop (Hilton Head 2004), pp. 129-132, June, 2004.
,