Publications

Found 1228 results
Author [ Title(Desc)] Type Year
Filters: Filter is   [Clear All Filters]
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 
S
Saini, R., S. Bhardwaj, T. Nishida, and M. Sheplak, "Scaling Relations for Piezoresistive Microphones", International Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2000.
Wu, L., and H. Xie, "A scanning micromirror with stationary rotation axis and dual reflective surfaces for 360° forward-view endoscopic imaging", Solid-State Sensors, Actuators and Microsystems Conference, 2009. TRANSDUCERS 2009. International, Denver, CO, USA, IEEE, pp. 2222 -2225, 2009.
Wu, L., and H. Xie, "A scanning micromirror with stationary rotation axis and dual reflective surfaces for 360", 15th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers 2009), Denver, CO., June, 2009.
Smith, C. S., K. Sondhi, S. C. Mills, J. S. Andrew, H. Z. Fan, T. Nishida, and D. P. Arnold, "Screen-printable and stretchable hard magnetic ink formulated from barium hexaferrite nanoparticles", Journal of Materials Chemistry C, 2020.
Smith, C. S., R. Bowrothu, Y. Wang, F. Herrault, Y. K. Yoon, and D. P. Arnold, "Screen-Printable, Self-Biased SrM/PDMS Composites for Integrated Magnetic Microwave Devices", IEEE Transactions on Magnetics, vol. 57, issue 10, pp. 1 - 5, Jan-10-2021.
Smith, C. S., K. Sondhi, B. Y. Jimenez, H. Z. Fan, T. Nishida, and D. P. Arnold, "Screen-printed inductive silver ink strain sensor on stretchable TPU substrate", 2020 IEEE 70th Electronic Components and Technology Conference (ECTC), Virtual, 2020.
Xie, H., Y. Pan, and G. K. Fedder, "A SCS CMOS micromirror for optical coherence tomographic imaging", MEMS 2002 IEEE International Conference. , Las Vegas, NV, USA, IEEE, pp. 495 - 498, 2002.
Xie, H., Y. Pan, and G. K. Fedder, "A SCS Micromirror for Optical Coherance Tomographic Imaging", Sensors & Actuators, vol. 103, pp. 237-241, JAN, 2003.
Arnold, D. P., F. Cros, I. Zana, M. G. Allen, S. Das, and J. H. Lang, "Second-generation, silicon-based magnetic induction machines for microengine power generation", Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, Washington, DC, May, 2004.
Rassay, S., F. Hakim, C. Li, C. Forgey, N. Choudhary, and R. Tabrizian, "A Segmented‐Target Sputtering Process for Growth of Sub‐50 nm Ferroelectric Scandium–Aluminum–Nitride Films with Composition and Stress Tuning", physica status solidi (RRL) – Rapid Research Letters, vol. 15, issue 5, pp. 2100087, Jan-05-2021.
Duan, C., W. Wang, X. Zhang, L. Zhou, A. Pozzi, and H. Xie, "A Self-Aligned 45°-Tilted Two-Axis Scanning Micromirror for Side-View Imaging", Journal of Microelectromechanical Systems, vol. 4, pp. 799-811, 2016.
Shetye, S., I. Eskinazi, and D. P. Arnold, "Self-assembly of millimeter-scale components using integrated micromagnets", IEEE Trans. Magn., vol. 44, no. 11, pp. 4293-4296, NOV, 2008.
Arnold, D. P., P. Galle, F. Herrault, S. Das, J. H. Lang, and M. G. Allen, "A self-contained, flow-powered microgenerator system", Tech. Dig. 5th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2005), Tokyo, Japan, pp. 113-115, November, 2005.
Kadirvel, S., F. Liu, S. Horowitz, T. Nishida, K. Ngo, L. Cattafesta, and M. Sheplak, "A Self-Powered Wireless Active Acoustic Liner", 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA, May, 2006.
Fang, S-P., T. Schumann, L. Garcia, and Y.-K. Yoon, "Semiconductor-Based SensorsEmerging Nanotechnology for Strain Gauge Sensor", Semiconductor-Based Sensors: WORLD SCIENTIFIC, pp. 435 - 472, 2016.
Smarslok, B. P., D. Alexander, R. T. Haftka, L. Carraro, and D. Ginsbourger, "Separable Monte Carlo Simulation Applied to Laminated Composite Plates Reliability", 49th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, IL, AIAA, 04/2008.
Han, K., and T. Nishida, "Sequential substrate and channel hot electron injection to separate oxide and interface traps in n-MOST", Solid-State Electronics, vol. 38, pp. 105-113, JAN, 1995.
Garcia-Cordero, J. L., and H. Z. Fan, "Sessile droplets for chemical and biological assays", Lab on a Chip, vol. 17, issue 13, pp. 2150 - 2166, May-23-2017.
Bahr, C., N. Zawodny, T. Yardibi, F. Liu, D. Wetzel, B. Bertolucci, and L. Cattafesta, "Shear Layer Correction Validation using a Non-Intrusive Acoustic Point Source", 16th AIAA/CEAS Aeroacoustics Conference, Stockholm, Sweden, June, 2010.
Bahr, C., N. Zawodny, T. Yardibi, F. Liu, D. Wetzel, B. Bertolucci, and L. Cattafesta, "Shear layer time-delay correction using a non-intrusive acoustic point source", International Journal of Aeroacoustics, vol. 10, no. 5 & 6, pp. 497-530, 9/2011.
Chandrasekharan, V., J. Naughton, and M. Sheplak, "Shear Stress Measurements", Encyclopedia of Aerocpace Engineering, 1, vol. 1, 2010.
Das, C., A. Trivedi, K. Mitra, and T. Vo-Dinh, "Short pulse laser propagation through tissues", SPIE, vol. 4958, pp. 126-136, August, 2003.
Das, C., A. Trivedi, K. Mitra, and T. Vo-Dinh, "Short pulse laser propagation through tissues for biomedical imaging", J. Phys. D: Appl. Phys., vol. 36, pp. 1714-1721, FEB, 2003.
Wang, W., J. Chen, A.S. Zivkovic, C. Duan, and H. Xie, "A silicon based Fourier transform spectrometer base on an open-loop controlled electrothermal MEMS mirror", TRANSDUCERS 2015 - 2015 18th International Solid-State Sensors, Actuators and Microsystems Conference2015 Transducers - 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), Anchorage, AK, USA, IEEE, pp. 212 - 215, 7/2015.
Wang, M., J. Li, K. Ngo, and H. Xie, "Silicon Molding Techniques for Integrated Power MEMS Inductors", Sensors & Actuators: A. Physical, 2010.