Publications

Horowitz, S., T-A. Chen, L. Cattafesta, M. Sheplak, T. Nishida, and V. Chandrasekaran, "Optical Flow Sensor Using Geometric Moire Interferometry", 34th International Conference on Environmental Systems, SAE Paper 2004-01-2267, Colorado Springs, CO, July, 2004.

Chen, T-A., D. Mills, V. Chandrasekharan, H. Zmuda, and M. Sheplak, "Optical Miniaturization of a MEMS-Based Floating Element Shear Stress Sensor with Moir", 48th AIAA Aerospace Sciences Meeting, AIAA Paper 2010-0498, 01/2010.

Lee, S.J., J. Sun, J. Flint, S. Guo, H. Xie, M. King, and M. Sarntinoranont, "Optically based-indentation technique for acute rat brain tissue slices and thin biomaterials", Journal of Biomedical Materials Research: Part B - Applied Biomaterials, vol. 97B, no. 1,, 2011.

Lee, S., J. Sun, H. Xie, and M. Sarntinoranont, "An Optically-Based Indentation Technique for Thin Soft Biomaterials", 2009 Biomedical Engineering Society Annual Fall Meeting, Pittsburgh, PA, 2009.

Ghosh, A., and S. Pal, "Optimal actuation of a MEMS cantilever by a laser beam", SPIE Optics East, Paper 6374A-20, Boston, MA, October, 2006.

Pal, S., and A. Ghosh, "Optimal actuation of micro-cantilevers by laser radiation pressure", IEE Electronics Letters, vol. 42, no. 10, pp. 580-581, MAY, 2006.

Arnold, D. P., I. Zana, F. Herrault, P. Galle, J. Park, S. Das, J. H. Lang, and M. G. Allen, "Optimization of a microscale, axial-flux, permanent-magnet generator", Tech. Dig. 5th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2005), Tokyo, Japan, pp. 165-168, November, 2005.

Jackson, K., S. Jin, and H. Z. Fan, "Optimization of a miniaturized fluid array device for cell-free protein synthesis", Biotechnology and Bioengineering, vol. 112, issue 12, pp. 2459 - 2467, 12/2015.

Liu, F., S. Horowitz, L. Cattafesta, and M. Sheplak, "Optimization of an Electromechanical Helmholtz Resonator", 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA, May, 2006.

Papila, M., M. Sheplak, and L. Cattafesta, "Optimization of Clamped Circular Piezoelectric Composite Actuators", Sensors & Actuators A, vol. 147, no. 1, pp. 310-323, SEP, 2008.

Cheng, S., N. Wang, and D. P. Arnold, "Optimization of magnetic vibrational energy harvesting systems using equivalent circuit representations", Tech. Dig. 7th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2007), Freiburg, Germany, pp. 89-92, November, 2007.

Cheng, S., and D. P. Arnold, "Optimization of Permanent Magnet Assemblies Using Genetic Algorithms", IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 4104-4107, 11/2011.

Wang, D., M. Yu, D. F. Wang, T. Itoh, and R. Maeda, "Optimization of Piezoelectric Pattern Design in Ring-shaped Resonators for Health-care and Environmental Applications", Procedia Engineering, vol. 120, pp. 528 - 531, Jan-01-2015.

Gallas, Q., G. Wang, M. Papila, M. Sheplak, and L. Cattafesta, "Optimization of Synthetic Jet Actuators", 41st Aerospace Sciences Meeting & Exhibit, AIAA Paper 2003-0635, Reno, NV, January, 2003.

Mathew, J., Q. Song, B. V. Sankar, M. Sheplak, and L. Cattafesta, "Optimized Design of Piezoelectric Flap Actuators for Active Flow Control", AIAA Journal, vol. 44, no. 12, pp. 2919-2928, SEP, 2006.

Nishida, T., and S. Thompson, "Oxide field and thickness dependence of trap generation in 9-30 nm dry and dry/wet/dry oxides", Journal of Applied Physics, vol. 69, pp. 3986-3994, DEC, 1991.

Pal, S., and H. Xie, "A parametric dynamic compact thermal model of an electrothermally actuated micromirror", Journal of Micromechanics and Microengineering, vol. 19, no. 6, pp. 065007, 2009.

Ravi, S., D. Horner, and S. Moghaddam, "Parametric Study of The Transport Properties of Wicking Micro-Pillar Arrays", ASME 2013 Summer Heat Transfer Conference, Minneapolis, MN, 2013.

Yu, D., J. Chung, and S. Moghaddam, "Parametric study of water vapor absorption into a constrained thin film of lithium bromide solution", International Journal of Heat and Mass Transfer, vol. 55, issue 21-22, pp. 5687 - 5695, Jan-10-2012.

Shetye, S., I. Eskinazi, and D. P. Arnold, "Part-to-Part and Part-to-Substarte Magnetic Self-Assembly of Millimeter Scale Components with Angular Orientation", Tech. Dig. 22nd IEEE Int. Conf. MicroElectro Mechanical Systems (MEMS 2009), Sorrento, Italy, pp. 669-672, January, 2009.

Palavicini, M., B. George, and L. Cattafesta, "Passive Flow Control over a Three-Dimensional Turret with a Flat Aperture", 41st AIAA Fluid Dynamics Conference and Exhibit, Honolulu, Hawaii, AIAA, 07/2011.

Sells, J., V. Chandrasekharan, H. Zmuda, M. Sheplak, and D. P. Arnold, "Passive Wireless Direct Shear Stress Measurement", Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, pp. 368-371, 06/2010.

Rogers, J. E., Y-K. Yoon, M. Sheplak, and J. W. Judy, "A Passive Wireless Microelectromechanical Pressure Sensor for Harsh Environments", Journal of Microelectromechanical Systems, vol. 27, issue 1, pp. 73 - 85, Jan-02-2018.

Wang, Y., R. Bowrothu, Y-K. Yoon, and D. P. Arnold, "Patterning of thick electroplated CoPt magnets using SU-8 micromoulds", Micro & Nano Letters, vol. 14, issue 14, pp. 1393 - 1396, Jun-12-2020, 2019.

Heymann, D., C. D. Meyer, N. Jankowski, and B. C. Morgan, "Performance Modeling of Thermoelectric Generators as a Function of System Thermal Management", PowerMEMS, Washington, DC, Technical Digest of the 9th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, 12/2009.