Publications

Nishida, T., "Mission Innovation: The Driver for Global Pollution Monitoring Node Today, Tomorrow and in 2025", Commercialization of Micro, Nano, and Emerging Technologies, 2016.

Oniku, O. D., and D. P. Arnold, "Mitigation of interfacial silicide reactions for electroplated CoPt films on Si substrates", Journal of Physics: Conference Series, vol. 660, no. 1, pp. 012140, 2015.

Lomenzo, P. D., Q. Takmeel, C. Zhou, C-C. Chung, S. Moghaddam, J. L. Jones, and T. Nishida, "Mixed Al and Si doping in ferroelectric HfO 2 thin films", Applied Physics Letters, vol. 107, issue 24, pp. 242903, Feb-12-2016, 2015.

Appukuttan, A., W. Shyy, M. Sheplak, and L. Cattafesta, "Mixed Convection Induced by MEMS-Based Thermal Shear Stress Sensors", Numerical Heat Transfer-A, vol. 43, no. 3, pp. 283-305, JUL, 2003.

Ward, K., and H. Z. Fan, "Mixing in microfluidic devices and enhancement methods", Journal of Micromechanics and Microengineering, vol. 25, issue 9, pp. 094001, 09/2015.

Schultz, T., L. Cattafesta, and M. Sheplak, "Modal decomposition method for acoustic impedance testing in rectangular ducts", 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA 2006-1014, Reno, NV, January, 2006.

Schultz, T., L. Cattafesta, and M. Sheplak, "Modal decomposition method for acoustic impedance testing in square ducts", J. Acoust. Soc. Am., vol. 120, no. 6, pp. 3750-3758, DEC, 2006.

Schultz, T., L. Cattafesta, and M. Sheplak, "Modal Decomposition Method for High Frequency Acosutic Impedance Testing", ASA Fall Meeting, Minneapolis, MN, October, 2005.

Griffin, B. A., V. Chandrasekaran, M. D. Williams, B. V. Sankar, and M. Sheplak, "Model for thermoelastic actuation of an axisymmetric isotropic circular plate via an internal harmonic heat source", International Journal of Solids and Structures, 02/2011.

Lanier, O. L., C. Velez, D. P. Arnold, and J. Dobson, "Model of Magnetic Particle Capture Under Physiological Flow Rates for Cytokine Removal During Cardiopulmonary Bypass", IEEE Transactions on Biomedical Engineering, vol. 68, issue 4, pp. 1198 - 1207, Jan-04-2021.

Zhang, H., D. Xu, X. Zhang, Q. Chen, H. Xie, and S. Li, "Model-Based Angular Scan Error Correction of an Electrothermally-Actuated MEMS Mirror", Sensors, vol. 15, issue 12, pp. 30991 - 31004, Jan-12-2015.

Han, F., W. Wang, X. Zhang, and H. Xie, "Modeling and Control of a Large-Stroke Electrothermal MEMS Mirror for Fourier Transform Microspectrometers", Journal of Microelectromechanical Systems, vol. 4, pp. 750-760, 2016.

Cattafesta, L., J. Mathew, and A. Kurdila, "Modeling and Design of Piezoelectric Actuators for Fluid Control", World Aviation Conference, San Diego, CA, October, 2000.

Cattafesta, L., J. Mathew, and A. Kurdila, "Modeling and Design of Piezoelectric Actuators for Fluid Flow Control", SAE 2000 Transactions Journal of Aerospace, vol. 109, pp. 1088-1095, JAN, 2001.

Garraud, N., A. Garraud, D. Munzer, M. Althar, and D. P. Arnold, "Modeling and experimental analysis of rotating magnet receivers for electrodynamic wireless power transmission", Journal of Physics D: Applied Physics, vol. 52, issue 18, pp. 185501, Feb-27-2019.

Li, Y., M. Papila, T. Nishida, L. Cattafesta, and M. Sheplak, "Modeling and optimization of a side-implanted piezoresistive shear stress sensor", Proceeding of SPIE 13th Annual International Symposium on Smart Structures and Materials, Paper 6174-7, San Diego, CA, February, 2006.

Oniku, O. D., A. Garraud, E. Shorman, W. C. Patterson, and D. P. Arnold, "Modeling of a micromagnetic imprinting process", Tech. Dig. Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head 2014), Hilton Head, SC, pp. 187-190, 06/2014.

Sawant, S. G., M. Oyarzun, M. Sheplak, L. Cattafesta, and D. P. Arnold, "Modeling of electrodynamic zero-net mass-flux actuators", AIAA Journal, vol. 50, no. 6, 06/2012.

Williams, M. D., F. Van Keulen, and M. Sheplak, "Modeling of Initially Curved Beam Structures for Design of Multistable MEMS", Journal of Applied Mechanics, vol. 79, no. 1, 01/2012.

Williams, M. D., F. Van Keulen, and M. Sheplak, "Modeling of Initially Curved Beam Structures for Design of Multistable MEMS", 2009 ASME International Mechanical Engineering Congress, Lake Buena Vista, FL, November, 2009.

Cheng, S., N. Wang, and D. P. Arnold, "Modeling of magnetic vibrational energy harvesters using equivalent circuit representations", J. Micromech. Microeng., vol. 17, no. 11, pp. 2328-2335, NOV, 2007.

Yu, D., J. Chung, and S. Moghaddam, "Modeling of Membrane-based Absorption Process in a New Generation LiBr-Water Absorption Refrigeration System", ASME 3rd Micro/Nanoscale Heat & Mass Transfer International Conference, Atlanta, GA, 03/2012.

Arunajatesan, S., M. Oyarzun, M. Palavicini, and L. Cattafesta, "Modeling of Zero-Net Mass-Flux Actuators for Feedback Flow Control", 47th AIAA Aerospace Sciences Meeting, AIAA Paper 2009-0743, January, 2009.

Li, M., Q. Chen, Y. Liu, Y. Ding, and H. Xie, "Modelling and Experimental Verification of Step Response Overshoot Removal in Electrothermally-Actuated MEMS Mirrors", Micromachines, vol. 8, issue 10, pp. 289, Jan-10-2017.

Naughton, J., and M. Sheplak, "Modern Developments in Shear Stress Measurement", Progress in Aerospace Sciences, vol. 38, pp. 515-570, JUL, 2002.