Publications

Pal, S., and H. Xie, "Design and Fabrication of 2D Fast Electrothermal Micromirrors with Large Scan Range and Small Center Shift", Transducers'11, The 16th International Conference on Solid-State Sensors, Actuators and Microsystems, Beijing, 06/2011.

Pal, S., S.R. Samuelson, X. Zhang, and H. Xie, "Large in-plane displacement microactuators based on electro-thermal bimorphs with folded multiple segments", Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS EUROSENSORS XXVII), 2013 Transducers Eurosensors XXVII: The 17th International Conference on, pp. 1587-1590, June, 2013.

Pal, S., and H. Xie, "Dynamic Compact Thermal Model of an Electrothermal Micromirror Based on Transmission Line Theory", Microtech Conference and Expo (Nanotech 2010 vol. 2), Anaheim, CA, NSTI, 2010.

Pal, S., and H. Xie, "Maximization of constant velocity scan range of electrothermally-actuated micromirror by pulse width modulated drive", Optical MEMS and Nanophotonics, 2009 IEEE/LEOS International Conference on, Clearwater Beach, FL, pp. 55 -56, 08/2010, 2009.

Pal, S., and H. Xie, "Fabrication of robust electrothermal MEMS devices using aluminum–tungsten bimorphs and polyimide thermal isolation", Journal of Micromechanics and Microengineering, vol. 22, issue 11, pp. 115036, 11/2012.

Pal, S., and H. Xie, "Pre-Shaped Open Loop Drive of Electrothermal Micromirror by Continuous and Pulse Width Modulated Waveforms", Quantum Electronics, IEEE Journal of, vol. 46, no. 9, pp. 1254 -1260, 09/2010.

Pal, S., and H. Xie, "Analysis and Simulation of Curved Bimorph Microactuators", Microtech Conference and Expo (Nanotech 2010 vol. 2), Anaheim, CA, NSTI, 2010.

Pal, S., and A. Ghosh, "Optimal actuation of micro-cantilevers by laser radiation pressure", IEE Electronics Letters, vol. 42, no. 10, pp. 580-581, MAY, 2006.

Pal, S., and H. Xie, "Distributed and lumped element models for a bimorph-actuated micromirror", Journal of Micromechanics and Microengineering, vol. 20, no. 4, pp. 045020, 2010.

Pal, S., and H. Xie, "Analysis and Fabrication of Curved Multimorph Transducers that Undergo Bending and Twisting", IEEE/ASME Journal of Microelectromechanical Systems (accepted, In Press), 2012.

Palavicini, M., B. George, and L. Cattafesta, "Passive Flow Control over a Three-Dimensional Turret with a Flat Aperture", 41st AIAA Fluid Dynamics Conference and Exhibit, Honolulu, Hawaii, AIAA, 07/2011.

Pan, M., A. Eiguren-Fernandez, H. Hsieh, N. Afshar-Mohajer, S.V. Hering, J. Lednicky, H. Z. Fan, and C.-Y. Wu, "Efficient collection of viable virus aerosol through laminar-flow, water-based condensational particle growth", Journal of Applied Microbiology, vol. 120, issue 3, pp. 805 - 815, Jan-03-2016.

Pan, Y., Z. Wang, Z.L. Wu, A. Jain, and H. Xie, "Diagnosis of Biological Tissue Morphology and Function with Endoscopic Optical Coherence Tomography", 2005 IEEE Engineering in Medicine and Biology 27th Annual Conference2005 IEEE Engineering in Medicine and Biology 27th Annual Conference, Shanghai, China, IEEE, pp. 7217 - 7220, 2005.

Pan, M., T. S. Bonny, J. Loeb, X. Jiang, J. A. Lednicky, A. Eiguren-Fernandez, S. Hering, H. Z. Fan, and C-Y. Wu, "Collection of Viable Aerosolized Influenza Virus and Other Respiratory Viruses in a Student Health Care Center through Water-Based Condensation Growth", mSphere, vol. 2, issue 5, pp. e00251-17, Oct-11-2017.

Pan, Y., H. Xie, and G. K. Fedder, "Endoscopic Optical Coherence Tomography Based on a CMOS-MEMS micromirror", Optics Letters, vol. 26, no. 24, pp. 1966-1968, DEC, 2001.

Paneri, A., and S. Moghaddam, "Proton and Methanol Transport Characteristics of Laminated Graphene Oxide Nanoplatelets", ASME 2013 11th International Conference on Nanochannels, Microchannels, and Minichannels, Sapporo, Japan, 06/2013.

Paneri, A., and S. Moghaddam, "Methanol and Proton Transport Characteristics of Graphene Oxide Proton Exchange Membrane", ASME 2013 Fuel Cell Science, Engineering and Technology Conference, Minneapolis, MN, 07/2013.

Paneri, A., and S. Moghaddam, "Graphene Oxide based Proton Exchange Membrane for High Concentration Direct Methanol Fuel Cells", TechConnect World Innovation Conference & Expo, 2016.

Paneri, A., and S. Moghaddam, "Impact of synthesis conditions on physicochemical and transport characteristics of graphene oxide laminates", Carbon, vol. 86, pp. 245 - 255, Jan-05-2015.

Paneri, A., G. Ehlert, H. Sodano, and S. Moghaddam, "Graphene-based Proton Exchange Membrane for Direct Methanol Fuel Cells (DMFCs)", Nanotech Conference and Expo 2012, Santa Clara, CA, 07/2012.

Paneri, A., and S. Moghaddam, "GO-based Fil-tration Membrane for Removal of Endo-crine Disrupting Compounds (EDCs) from Water", TechConnect World Innovation Conference & Expo, pp. 213-216, 2016.

Paneri, A., Y. Heo, G. Ehlert, A. Cottrill, H. Sodano, P. Pintauro, and S. Moghaddam, "Proton selective ionic graphene-based membrane for high concentration direct methanol fuel cells", Journal of Membrane Science, vol. 467, pp. 217 - 225, Jan-10-2014.

Paneri, A., and S. Moghaddam, "GO-based Filtration Membrane for Removal of Endocrine Disrupting Compounds (EDCs) from Water Resources", ASME HT/FE/ICNMM 2016, 2016.

Papila, M., R. T. Haftka, T. Nishida, and M. Sheplak, "Piezoresistive Microphone Design Pareto Optimization: Tradeoff between Sensitivity and Noise Floor", J. Microelectromechanical Systems, vol. 15, no. 6, pp. 1632-1643, DEC, 2006.

Papila, M., M. Sheplak, and L. Cattafesta, "Optimization of Clamped Circular Piezoelectric Composite Actuators", Sensors & Actuators A, vol. 147, no. 1, pp. 310-323, SEP, 2008.