Publications

Nishida, T., R. Dieme, M. Sheplak, and G. Bosman, "Noise Modeling and Characterization of Piezoresistive Transducers", Proceedings of ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2006-15392, November, 2006.

Nishida, T., and S. Thompson, "Oxide field and thickness dependence of trap generation in 9-30 nm dry and dry/wet/dry oxides", Journal of Applied Physics, vol. 69, pp. 3986-3994, DEC, 1991.

Nishida, T., J. Lin, K. Ngo, F. Ren, D. Norton, S. J. Pearton, L. Cattafesta, M. Sheplak, J. Jun, A. Kasyap V.S., et al., "Wireless Hydrogen Sensor Self-powered Using Ambient Vibration and Light", Proceedings of ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2006-14644, November, 2006.

Nishida, T., and C-T. Sah, "A physically based mobility model for MOSFET numerical simulation", IEEE Trans. Electron Devices, vol. 34, no. 2, pp. 310-320, FEB, 1987.

Nishida, T., "TSensors Vision: Enabling Sustainable Solutions for the Global Environment through Novel Sensing", MEMS & Sensors Executive Congress, 2016.

Nishida, T., "Wireless Implantable Recording Electrodes (FWIRE) for Brain Machine Interfaces", IEEE International Symposium on Circuits and Systems, 2007 (ISCAS 2007), pp. 2084 , May, 2007.

Martin, D., "Design, fabrication, and characterization of a MEMS dual-backplate capacitive microphone", Deparment of Electrical and Computer Engineering, vol. Ph.D., Gainesville, University of Florida, pp. 250, 2007.

Nishida, T., "Mission Innovation: The Driver for Global Pollution Monitoring Node Today, Tomorrow and in 2025", Commercialization of Micro, Nano, and Emerging Technologies, 2016.

Nishida, T., "BiMOS and SMOSC structures for MOS parameter measurement", Solid-State Electronics, vol. 35, pp. 357-369, MAR, 1992.

Nishida, T., R. Matsukawa, K. Masaki, Z. Dubinsky, and I. Karube, "A method for screening potential antioxidant activity", J. Biotechnology, vol. 51, pp. 149-155, DEC, 1996.

Nunamaker, E. A., B. S. Spearman, J. B. Graham, E. W. Atkinson, V. H. Desai, C. S. Shafor, S. Natt, R. A. Wachs, C. E. Schmidt, J. W. Judy, et al., "Implantation methodology development for tissue-engineered-electronic-neural-interface (TEENI) devices", 2017 8th International IEEE/EMBS Conference on Neural Engineering (NER), Shanghai, China, IEEE, 2017.

Ok, I., K. Akarvardar, S. Lin, M. Baykan, C.D. Young, P.Y. Hung, M.P. Rodgers, S. Bennett, H.O. Stamper, D.L. Franca, et al., "Strained SiGe and Si FinFETs for High Performance Logic with SiGe/Si Stack on SOI", International Electron Devices Meeting, San Francisco, CA, IEEE, 2010.

Oniku, O. D., B. Qi, and D. P. Arnold, "Electroplated thick-film cobalt platinum permanent magnets", Journal of Magnetism and Magnetic Materials, vol. 416, pp. 417 - 428, Jan-10-2016.

Oniku, O. D., and D. P. Arnold, "Mitigation of interfacial silicide reactions for electroplated CoPt films on Si substrates", Journal of Physics: Conference Series, vol. 660, no. 1, pp. 012140, 2015.

Oniku, O. D., R. Regojo, Z. A. Kaufman, W. C. Patterson, and D. P. Arnold, "Batch patterning of sub-millimeter features in hard magnetic films using pulsed magnetic fields and soft magnetizing heads", IEEE Trans. on Magn., vol. 49, no. 7, 07/2013.

Oniku, O. D., and D. P. Arnold, "Microfabrication of High-Performance Thick Co80Pt20 Permanent Magnets for Microsystems Applications", ECS Transactions, vol. 50, issue 10, pp. 167 - 174, 03/2013, 2012.

Oniku, O. D., and D. P. Arnold, "High-energy-density permanent micromagnets formed from heterogeneous magnetic powder mixtures", 2012 IEEE 25th International Conference on Micro Electro Mechanical Systems (MEMS), Paris, France, IEEE, pp. 436 - 439, 2012.

Oniku, O. D., P. V. Ryiz, A. Garraud, and D. P. Arnold, "Imprinting of fine-scale magnetic patterns in electroplated hard magnetic films using magnetic foil masks", Journal of Applied Physics, vol. 115, issue 17, pp. 17A718, 05/2014.

Oniku, O. D., B. Bowers, S. B. Shetye, N. Wang, and D. P. Arnold, "Permanent magnet microstructures using dry-pressed magnetic powders", Journal of Micromechanics and Microengineering, vol. 23, issue 7, pp. 075027, 07/2013.

Oniku, O. D., B. Qi, and D. P. Arnold, "Electroplated L10 CoPt thick-film permanent magnets", J. Appl. Phys., vol. 115, pp. 17E521, 02/2014.

Oniku, O. D., B. Qi, and D. P. Arnold, "Effect of current density on electroplated CoPt thick films", TRANSDUCERS 2015 - 2015 18th International Solid-State Sensors, Actuators and Microsystems Conference2015 Transducers - 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), Anchorage, AK, USA, IEEE, pp. 596 - 601, 2015.

Oniku, O. D., B. Qi, and D. P. Arnold, "Electroplated thick-film cobalt platinum permanent magnets", Journal of Magnetism and Magnetic Materials, 5/2016.

Oniku, O. D., A. Garraud, E. Shorman, W. C. Patterson, and D. P. Arnold, "Modeling of a micromagnetic imprinting process", Tech. Dig. Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head 2014), Hilton Head, SC, pp. 187-190, 06/2014.

Oxley, T. J., N. L. Opie, S. E. John, G. S. Rind, S. M. Ronayne, T. L. Wheeler, J. W. Judy, A. J. McDonald, A. Dornom, T. J. H. Lovell, et al., "Minimally invasive endovascular stent-electrode array for high-fidelity, chronic recordings of cortical neural activity", Nature Biotechnology, vol. 34, issue 3, pp. 320 - 327, Aug-02-2016.

Oyarzun, M., and L. Cattafesta, "Design and Optimization of Piezoceramic Zero-Net Mass-Flux Actuators", 5th AIAA Flow Control Conference, Chicago, IL, AIAA, 07/2010.