Publications

Pal, S., and H. Xie, "Fabrication of robust electrothermal MEMS devices using aluminum–tungsten bimorphs and polyimide thermal isolation", Journal of Micromechanics and Microengineering, vol. 22, issue 11, pp. 115036, 11/2012.

Zito, J., R. Durscher, J. Soni, S. Roy, and D. P. Arnold, "Flow and force inducement using micron size dielectric barrier discharge actuators", Appl. Phys. Lett., vol. 100, 05/2012.

Rao, Y., S. Cheng, and D. P. Arnold, "A fully self-sufficient energy harvesting system for human movements", Tech. Dig. 12th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2012), Atlanta, GA, IEEE, 12/2012.

Paneri, A., G. Ehlert, H. Sodano, and S. Moghaddam, "Graphene-based Proton Exchange Membrane for Direct Methanol Fuel Cells (DMFCs)", Nanotech Conference and Expo 2012, Santa Clara, CA, 07/2012.

Oniku, O. D., and D. P. Arnold, "High-energy-density permanent micromagnets formed from heterogeneous magnetic powder mixtures", 2012 IEEE 25th International Conference on Micro Electro Mechanical Systems (MEMS), Paris, France, IEEE, pp. 436 - 439, 2012.

Meyer, C. D., S. S. Bedair, B. C. Morgan, and D. P. Arnold, "Influence of Layer Thickness on the Performance of Stacked Thick-Film Copper Air-Core Power Inductors", IEEE Transactions on Magnetics, vol. 48, issue 11, pp. 4436 - 4439, 11/2012.

Tu, J. H., C. W. Rowley, J. Griffin, L. Cattafesta, A. Hart, and L. Ukeiley, "Integration of non-time-resolved PIV and time-resolved velocity point sensors for dynamic estimation of time-resolved velocity fields", 50th AIAA Aerospace Sciences Meeting, Nashville, TN, AIAA, 01/2012.

Xi, L., S. Grobmyer, L. Wu, R. Chen, G. Zhou, L. Gutwein, J. Sun, W. Liao, Q. Zhou, H. Xie, et al., "Intraoperative photoacoustic tumor imaging", Biomedical OpticsBiomedical Optics and 3-D Imaging, Miami, FloridaWashington, D.C., OSA, pp. BSu3A.48, 2012.

Peterson, B., W. C. Patterson, F. Herrault, D. P. Arnold, and M. G. Allen, "Laser-micromachined permanent magnet arrays with spatially alternating magnetic field distribution", Tech. Dig. 12th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2012), Atlanta, GA, IEEE, 12/2012.

Lusk, T., L. Cattafesta, and L. Ukeiley, "Leading edge slot blowing on an open cavity in supersonic flow", Experiments in Fluids, 2012.

Zito, J., R. Durscher, J. Soni, S. Roy, and D. P. Arnold, "Mechano-fluidic characterization of microscale dielectric barrier discharge plasma actuators", Hilton Head 2012, Hilton Head Island, SC, 06/2012.

Challa, V. R., and D. P. Arnold, "MEMS electrodynamic vibrational energy harvesters using multi-pole magnetic architectures", Tech. Dig. 12th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2012), Atlanta, GA, IEEE, 12/2012.

Liu, L., S. Pal, and H. Xie, "MEMS mirrors based on a curved concentric electrothermal actuator", Sensors and Actuators A: Physical (In Press), 2012.

Liu, L., S. Pal, and H. Xie, "MEMS mirrors based on a curved concentric electrothermal actuator", Sensors and Actuators A: Physical, 3/2012.

Divakar, V., Y. Zhang, J. Zito, E. A. Salley, and D. P. Arnold, "Microelectromechanical inductors with high inductance density via mechanical energy storage", J. Micromech. Microeng., vol. 22, no. 9, pp. 11, 08/2012.

Oniku, O. D., and D. P. Arnold, "Microfabrication of High-Performance Thick Co80Pt20 Permanent Magnets for Microsystems Applications", ECS Transactions, vol. 50, issue 10, pp. 167 - 174, 03/2013, 2012.

Moghaddam, S., "Micro/Nanoengineering the Next Generation Thermal-Fluid and Energy Conversion Systems", ASME Heat Transfer, Fluid Engineering, and Nanochannels and Microchannels Conference, Puerto Rico, USA, 07/2012.

Xu, X., K. Liu, and Z.H. Fan, "Microscale 2D separation systems for proteomic analysis", Expert Review of Proteomics, vol. 9, issue 2, pp. 135 - 147, 04/2012.

Zito, J., D. P. Arnold, T. Houba, J. Soni, R. Durscher, and S. Roy, "Microscale dielectric barrier discharge plasma actuators: performance characterization and numerical comparison", 43rd AIAA Plasmadynamics and Lasers Conf., New Orleans, LA, AIAA, 06/2012.

Sawant, S. G., M. Oyarzun, M. Sheplak, L. Cattafesta, and D. P. Arnold, "Modeling of electrodynamic zero-net mass-flux actuators", AIAA Journal, vol. 50, no. 6, 06/2012.

Williams, M. D., F. Van Keulen, and M. Sheplak, "Modeling of Initially Curved Beam Structures for Design of Multistable MEMS", Journal of Applied Mechanics, vol. 79, no. 1, 01/2012.

Yu, D., J. Chung, and S. Moghaddam, "Modeling of Membrane-based Absorption Process in a New Generation LiBr-Water Absorption Refrigeration System", ASME 3rd Micro/Nanoscale Heat & Mass Transfer International Conference, Atlanta, GA, 03/2012.

Chung, J., and S. Moghaddam, "Molecular Dynamics Simulation of Phases Interactions in Membrane-based Absorption and Desorption Processes", ASME 3rd Micro/Nanoscale Heat & Mass Transfer International Conference, Atlanta, GA, 03/2012.

Pal, S., S. Samuelson, and H. Xie, "Novel mechanisms for millimeter range piston actuation of vertical micromirrors and microlenses", International Conference on Optical MEMS and Nanophotonics, Banff, Alberta, Canada, 2012.

Yu, D., J. Chung, and S. Moghaddam, "Parametric study of water vapor absorption into a constrained thin film of lithium bromide solution", International Journal of Heat and Mass Transfer, vol. 55, issue 21-22, pp. 5687 - 5695, Jan-10-2012.