Publications
"Experimental verification of a capacitive shear stress sensor for low-speed wind tunnel applications", Hilton Head 2012, Hilton Head Island, SC, 06/2012.
, "Cell-Free Protein Synthesis in Microfluidic Array Devices", Biotechnology Progress, vol. 23, issue 6, pp. 1305 - 1311, 12/2007.
, "Protein synthesis in a device with nanoporous membranes and microchannels", Lab on a Chip, vol. 10, issue 19, pp. 2541, 2010.
, "Ricin Detection by Biological Signal Amplification in a Well-in-a-Well Device", Analytical Chemistry, vol. 78, issue 22, pp. 7659 - 7664, 11/2006.
, "Fabrication of Microfluidic Reactors and Mixing Studies for Luciferase Detection", Analytical Chemistry, vol. 80, issue 15, pp. 6045 - 6050, 08/2008.
, "FABRICATING A PLASTIC MESOFLUIDIC DEVICE FOR PROTEIN SYNTHESIS", ASME Conference, IMECE paper 2006-14122, Chicago, IL, November, 2006.
, "Toxin Detection by a Miniaturized in Vitro Protein Expression Array", Analytical Chemistry, vol. 77, no. 17, pp. 5494-5500, SEP, 2005.
, "A Review of Phased Array Steering for Narrow-Band Electrooptical Systems", Proceedings of the IEEE, vol. 97, issue 6, pp. 1078 - 1096, 06/2009.
, "Turbulence Measurements in a Mach 11 Helium Boundary Layer", 25th AIAA Fluid Dynamics Conference, AIAA Paper 94-2364, Colorado Springs, CO, June, 1994.
, "Electrodynamic Wireless Power Transmission to a Torsional Receiver", Journal of Physics: Conference Series, vol. 476, London, UK, IOP Publishing, pp. 012004, 12/2013.
, "Extremum-seeking optimisation of fluidic jet-noise control", 15th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2009-3132, May, 2009.
, "Optimized Design of Piezoelectric Flap Actuators for Active Flow Control", AIAA Journal, vol. 44, no. 12, pp. 2919-2928, SEP, 2006.
, "Characterization of an Anechoic Wind Tunnel Facility", Proceedings of 2005 ASME: Mechanical Engineering Congress and Exposition, Orlando, FL, November, 2005.
, "Finite Element Modeling of Piezoelectric Actuators for Active Flow Control Applications", 39th Aerospace Sciences Meeting & Exhibit, AIAA Paper 2001-0300, Reno, NV, January, 2001.
, "Design, Fabrication, and Characterization of an Anechoic Wind Tunnel Facility", 11th AIAA/CEAS Aeroacoustics Conference, Monterey, CA, May, 2005.
, "Design of a tubular microfabricated power generation system for hot exhaust streams", Tech. Dig. 7th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2007), Freiburg, Germany, pp. 249-252, November, 2007.
, "A Micromachined Dual-Backplate Capacitive Microphone for Aeroacoustic Measurements", J. Microelectromechanical Systems, vol. 16, no. 6, pp. 1289-1302, DEC, 2007.
, "An Instrumentation Grade MEMS Condenser Microphone for Aeroacoustic Measurements", 46th AIAA Aerospace Sciences Meeting and Exhibit, AIAA-2008-257, January, 2008.
, "A Surface Micromachined Capacitive Microphone for Aeroacoustic Applications", Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, June, 2008.
, "Development of a MEMS Dual Backplate Capacitive Microphone for Aeroacoustic Measurements", 44th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2006-1246, Reno, NV, January, 2006.
, "Surface and Bulk Micromachined Dual Back-Plate Condenser Microphone", 18th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2005), Miami, FL, January, 2005.
, "Development of Ball-Enabled Miniaturized Valves for Sample Preparation and Microheaters for Pathogen Detection", ASME 2020 Fluids Engineering Division Summer Meeting (FEDSM2020), 2020.
, "A Valve-Enabled Sample Preparation Device with Isothermal Amplification for Multiplexed Virus Detection at the Point-of-Care", ACS Sensors, vol. 6, pp. 4176–4184, 2021.
, "Valve-Enabled Sequential Reagent Delivery and Paper-Based Enrichment for Simultaneous Detection of SARS-CoV-2 and Influenza Viruses", International Conference on Miniaturized Systems for Chemistry and Life Sciences (µTAS), Palm Springs, CA, pp. 837-838, 2021.
, "Valve-Enabled Sample Preparation and Isothermal Amplification for SARS-CoV-2 Detection at the Point-of-Care", International Mechanical Engineering Congress and Exposition, online, ASME, 2021.
,