Publications

Found 1225 results
[ Author(Asc)] Title Type Year
Filters: Filter is   [Clear All Filters]
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 
N
Nishida, T., and C-T. Sah, "A physically based mobility model for MOSFET numerical simulation", IEEE Trans. Electron Devices, vol. 34, no. 2, pp. 310-320, FEB, 1987.
Nishida, T., "Wireless Implantable Recording Electrodes (FWIRE) for Brain Machine Interfaces", IEEE International Symposium on Circuits and Systems, 2007 (ISCAS 2007), pp. 2084 , May, 2007.
Martin, D., "Design, fabrication, and characterization of a MEMS dual-backplate capacitive microphone", Deparment of Electrical and Computer Engineering, vol. Ph.D., Gainesville, University of Florida, pp. 250, 2007.
Nishida, T., "TSensors Vision: Enabling Sustainable Solutions for the Global Environment through Novel Sensing", MEMS & Sensors Executive Congress, 2016.
Nishida, T., "BiMOS and SMOSC structures for MOS parameter measurement", Solid-State Electronics, vol. 35, pp. 357-369, MAR, 1992.
Nishida, T., R. Matsukawa, K. Masaki, Z. Dubinsky, and I. Karube, "A method for screening potential antioxidant activity", J. Biotechnology, vol. 51, pp. 149-155, DEC, 1996.
Nishida, T., "Mission Innovation: The Driver for Global Pollution Monitoring Node Today, Tomorrow and in 2025", Commercialization of Micro, Nano, and Emerging Technologies, 2016.
Nishida, T., R. Dieme, M. Sheplak, and G. Bosman, "Noise Modeling and Characterization of Piezoresistive Transducers", Proceedings of ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2006-15392, November, 2006.
Ngo, K., A. Phipps, T. Nishida, J. Lin, and S. Xu, "Power Converters for Piezoelectric Energy Extraction", Proceedings of ASME International Mechanical Engineering Congress and Exposition, Paper IMECE2006-14343, November, 2006.
Neugroschel, A., C-T. Sah, K. Han, M. Carroll, T. Nishida, J. Kavalieros, and Y. Lu, "Direct-current measurements of oxide and interface traps on oxidized silicon", IEEE Trans. Electron Dev., vol. 42, pp. 1657-1662, SEP, 1995.
Naughton, J., and M. Sheplak, "Modern Developments in Shear Stress Measurement", Progress in Aerospace Sciences, vol. 38, pp. 515-570, JUL, 2002.
Naughton, J., and M. Sheplak, "Modern Skin Friction Measurement Techniques: Description, Use, and What to Do with the Data", 21st AIAA Advanced Measurement Technology and Ground Testing Conference, AIAA Paper 2000-2521, Denver, CO, June, 2000.
M
Murray, N., and L. Ukeiley, "An Application of Gappy POD; for Subsonic Cavity Flow PIV Data", Experiments in Fluids, vol. 42, no. 1, pp. 79-91, JAN, 2007.
Murray, N., and L. Ukeiley, "Modified Quadratic Stochastic Estimation of Resonating Subsonic Cavity Flow", Journal of Turbulence, vol. 8, no. 53, DEC, 2007.
Mur-Miranda, J. Oscar, S. Cheng, and D. P. Arnold, "Improving the efficiency of electrodynamic wireless power transmission", 7th European Conf. Antennas and Propagation (EuCAP 2013), Gothenburg, Sweden, EurAAP, 04/2013.
Mortazavi, M., A. Fazeli, and S. Moghaddam, "Scalable bonding of nanofibrous polytetrafluoroethylene (PTFE) membranes on microstructures", Journal of Micromechanics and Microengineering, vol. 28, issue 1, pp. 015001, Dec-01-2017, 2018.
Mortazavi, M., and S. Moghaddam, "Scalable Bonding of Polytetrafluoroethylene (ePTFE) Nanofibrous Membranes on Microstructures", Enabling Nanofabrication for Rapid Innovation, Napa, CA, 2013.
Mortazavi, M., and S. Moghaddam, "Laplace transform solution of conjugate heat and mass transfer in falling film absorption process", International Journal of Refrigeration, vol. 66, pp. 93 - 104, Jan-06-2016.
Mortazavi, M., M. Schmid, and S. Moghaddam, "Compact and efficient generator for low grade solar and waste heat driven absorption systems", Applied Energy, vol. 198, pp. 173 - 179, Apr-28-2017.
Murray, N., Q. Song, L. Cattafesta, and L. Ukeiley, IUTAM Symposium on Flow Control and MEMS, vol. 7, pp. 183-190, 2008.
Morrish, D., L. Wu, H. Xie, J. Reynolds, A. Boussioutas, and M. Gu, "Nonlinear Imaging by an Endoscope Probe Incorporating a Tip-Tilt-Piston Microelectromechanical System Mirror", OSA Spring Optics & Photonics Congress,, Vancouver, Canada, April, 2009.
Morrish, D., L. Wu, H. Xie, A. Boussioutas, and M. Gu, "Nonlinear imaging of tissue by an endoscope probe incorporating a 3D scanning MEMS mirror", Australian Institute of Physics 18th Annual Conference, Adelaide, Australia, 2008.
Morrish, D., L. Wu, H. Xie, J. Reynolds, A. Boussioutas, and M. Gu, "Nonlinear Imaging by an Endoscope Probe Incorporating a Tip-Tilt-Piston Microelectromechanical System Mirror", Novel Techniques in Microscopy: Optical Society of America, pp. NWD1, 2009.
Morgan, B. C., S. S. Bedair, J. S. Pulskamp, R. G. Polcawich, C. D. Meyer, C. M. Dougherty, L. Xue, D. P. Arnold, R. Bashirullah, R. Miller, et al., "Power considerations for MAST platforms", Proc. SPIE Defense Security & Sensing Conf. (Micro- and Nanotechnology Sensors, Systems, and Applications II), vol. 7679, no. 76790V, 12 pages, Orlando, FL, 05/2010.
Morgan, B. C., S. S. Bedair, W. Nothwang, D. P. Arnold, C. D. Meyer, B. Bowers, A. Sopeju, C. M. Dougherty, L. Xue, and R. Bashirullah, "Micro-power requirements & conversion for autonomous microsystems", NATO SET-150 Specialist Meeting on Energy Technologies & Management for Portable Power for Military Applications, Brdo pri Kranju, Slovenia, 05/2009.