] Filters: Author is Arnold, David P. [Clear All Filters]
"Assessment of laser-induced damage in laser-micromachined rare-earth permanent magnets",
IEEE Trans. Magn., In Press.
"Batch patterning of sub-millimeter features in hard magnetic films using pulsed magnetic fields and soft magnetizing heads",
IEEE Trans. on Magnetics, In Press.
Batch magnetic patterning of hard magnetic films using pulsed magnetic fields and soft magnetizing heads,
, Chicago, IL, 12th Joint MMM/Intermag Conference, Jan. 2013.
Fabrication and Magnetic Characterization of thick electroplated L10 CoPt hard magnets,
, Chicago, IL, 12th Joint MMM/Intermag Conference, Jan. 2013.
"Influence of Layer Thickness on the Performance of Stacked Thick-Film Copper Air-Core Power Inductors",
IEEE Transactions on Magnetics, vol. 48, issue 11, pp. 4436 - 4439, 11/2012.
Abstract
"Wireless power transmission to an electromechanical receiver using low-frequency magnetic fields",
Smart Materials and Structures, vol. 21, issue 11, pp. 115017, 11/2012.
Abstract
"Microelectromechanical inductors with high inductance density via mechanical energy storage",
J. Micromech. Microeng., vol. 22, no. 9, pp. 11, 08/2012.
Evaluation of the Effects of Electroplating Conditions on the Material Properties of Iron Cobalt Thick Films using Design of Experiments,
: Proc. of ECS PRiME 2012, Honlulu, HI, 07/2012.
"A comparative study of two methods for driving electrodynamic zero-net-mass-flux actuators",
6th AIAA Flow Control Conf., AIAA Paper 2012-3241, New Orleans, LA, AIAA, 06/2012.
"Electromechanical inductors with enhanced electrical inductance",
Sensors & Actuators A. Physical, vol. 180, pp. 187-192, 06/2012.
"Experimental verification of a capacitive shear stress sensor for low-speed wind tunnel applications",
Hilton Head 2012, Hilton Head Island, SC, 06/2012.
"Mechano-fluidic characterization of microscale dielectric barrier discharge plasma actuators",
Hilton Head 2012, Hilton Head Island, SC, 06/2012.
Microfabrication of High Performance Thick Co80Pt20 Permanent Magnets for Microsystems Applicatons,
: ECS PRiME 2012 Meet. Abstr. MA2012-02, Honolulu HI, pp. 3414, 06/2012.
"Microscale dielectric barrier discharge plasma actuators: performance characterization and numerical comparison",
43rd AIAA Plasmadynamics and Lasers Conf., AIAA Paper 2012-3091, New Orleans, LA, AIAA, 06/2012.
"Modeling of electrodynamic zero-net mass-flux actuators",
AIAA Journal, vol. 50, no. 6, 06/2012.
"Ultra-miniaturized power converter modules using micromachined copper scaffolds",
Hilton Head 2012, Hilton Head Island, SC, 06/2012.
"Flow and force inducement using micron size dielectric barrier discharge actuators",
Appl. Phys. Lett., vol. 100, 05/2012.
"The role of coupling strength in the performance of electrodynamic vibrational energy harvesters",
Smart Materials and Structures, vol. 22, issue 2, pp. 025005, 02/2013, 2012.
Abstract
"Microfabrication and process integration of powder-based permanent magnets",
Technologies for Future Micro-Nano Manufacturing, Napa, California, August 2011.
Abstract
Download: 978-0-9743611-7-8MFG2011.pdf (1017.7 KB)
"An input-powered vibrational energy harvesting interface circuit with zero standby power",
IEEE Trans. Power Electron., vol. 46, no. 12, pp. 3524-3533, 12/2011.
"Optimization of Permanent Magnet Assemblies Using Genetic Algorithms",
IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 4104-4107, 11/2011.
"A resonant DC/AC inverter using an electromechanical device",
PowerMEMS 2011, Seoul, Korea, 11/2011.
"Experimental demonstration of an electrodynamic transformer",
IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 4433-4436, 10/2011.
"Microfabricated Silicon-on-Pyrex Passive Wireless Wall Shear Stress Sensor",
IEEE Sensors, IEEE Catalog Number: CFP11SEN-CDR, Limerick, Ireland, IEEE, 10/2011.
"A Voltage-Multiplying Self-Powered AC/DC Converter with 0.35 V Minimum Input Voltage for Energy Harvesting Applications",
IEEE Transactions on Power Electronics, vol. 26, no. 9, pp. 2542-2549, 09/2011.
"An active voltage doubling ac/dc converter for low-voltage energy harvesting applications",
IEEE Transactions on Power Electronics, vol. 26, no. 8, pp. 2258-2265, 08/2011.
Abstract
"A Microscale Differential Capacitive Direct Wall-Shear-Stress Sensor",
Journal of Microelectromechanical Systems, vol. 20, no. 3, 06/2011.
An electrodynamic transformer,
, Taipei, Taiwan, INTERMAG, 05/2011.
Permanent magnet structure optimization using genetic algorithm,
, Taipei, Taiwan, INTERMAG, 05/2011.
"Fabrication and characterization of parylene-bonded Nd–Fe–B powder micromagnets",
J. Applied Physics, vol. 109, no. 071753, 3 pages, 04/2011.
Abstract
"Input-powered energy harvesting interface circuits with zero standby power",
Applied Power Electronics Conf. & Exposition (APEC 2011), Fort Worth, TX, pp. 1992-1999, 03/2011.
Abstract
"Micromachined radial thermoelectric modules for power generation using hot gas streams",
J. Microelectromechanical Systems, vol. 20, no. 2, 03/2011.
Abstract
"Towards miniature step-up power converters for mobile microsystems",
Applied Power Electronics Conf. & Exposition (APEC 2011), Fort Worth, TX, pp. 1451-1455, 03/2011.
Abstract
"A Voltage-Multiplying Self-Powered AC/DC Converter with 0.35 V Minimum Input Voltage for Energy Harvesting Applications",
Applied Power Electronics Conf. & Exposition (APEC 2011), Fort Worth, TX, pp. 1311-1318, 03/2011.
Abstract
"Morphology and magnetic properties of electroplated Co-rich Co-Zn thin films",
Microsystem Technologies, vol. 17, no. 1, pp. 85-91, 01/2011.
Abstract
"Additive Processes for Metals",
MEMS Materials and Processes Handbook, New York, Springer, pp. 137-191, 2011.
Abstract
"Integrated Power Inductors and Capacitors Enabled by a Multilevel Molding Process",
220th ECS Meeting, Boston, MA, ECS, pp. 331 - 340, 2011.
Abstract
"Microfabricated silicon-on-Pyrex passive wireless wall shear stress sensor",
2011 IEEE Sensors2011 IEEE SENSORS Proceedings, Limerick, Ireland, IEEE, pp. 77 - 80, 2011.
Abstract
"Electromechanical inductors for power converter applications",
10th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2010), Leuven, Belgium, pp. 131-134, 12/2010.
Abstract
"The importance of coupling strength for maximizing the output power of electrodynamic vibrational energy harvesters",
10th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2010), Leuven, Belgium, pp. 351-354, 12/2010.
Abstract
"Wireless power transmission via magnetic coupling to an electrodynamic receiver",
10th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2010), Leuven, Belgium, pp. 61-64, 12/2010.
Abstract
Fabrication and characterization of parylene-coated Nd–Fe–B powder micromagnets,
, Atlanta, GA, 55th MMM Conf., 11/2010.
"Power for autonomous microsystems",
27th Army Science Conf., 5 pages, Orlando, FL, 11/2010.
Abstract
"A 100MHz 8x step-up dc-dc converter in 130nm 1.2V CMOS process with micro-fabricated air-core inductor",
2nd International Workshop on Power Supply On Chip, Cork, Ireland, 10/2010.
"Multilayer Micromachined Air-Core Power Inductors and Transformers",
2nd International Workshop on Power Supply On Chip, Cork, Ireland, 10/2010.
"An Input-Powered Active AC/DC Converter with Zero Standby Power for Energy Harvesting Applications",
IEEE Energy Conversion Congress and Exposition (ECCE), Atlanta, GA, pp. 4441-4446, 09/2010.
Abstract
"A MEMS Direct Skin Friction Sensor",
Florida Center for Advanced Aero-Propulsion, FCAAP Annual Symposium and Exhibition, 08/2010.
"Batch-fabricated electrodynamic microactuators with integrated micromagnets",
IEEE Trans. Magn., vol. 46, no. 6, pp. 1798-1801, 06/2010.
Abstract
"Fabrication and Electrical Characterization of Microscale Dielectric Barrier Discharge Devices",
Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head), Hilton Head, SC, pp. 238-241, 06/2010.
Abstract
"High-Inductance-Density, Air-Core, Power Inductors, and Transformers Designed for Operation at 100–500 MHz",
IEEE Transactions on Magnetics, vol. 46, issue 6, pp. 2236 - 2239, 06/2010.
Abstract
