] Filters: Author is Meyer, Christopher D. [Clear All Filters]
"Magnetic Nanoparticle Dosing of MEMS Structures by Solvent Evaporation in Capillaries",
IEEE Transactions on Magnetics, vol. 46, issue 6, no. 6, pp. 2198 - 2201, 06/2010.
Abstract
"Progress towards a micromachined thermoelectric generator using PbTe and PbSnSeTe thin films",
Tech. Dig. 6th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2006), Berkeley, CA, pp. 195-198, November, 2006.
Abstract
"Process development and material characterization of polycrystalline Bi2Te3, PbTe, and PbSnSeTe thin films on silicon for millimeter-scale thermoelectric generators",
J. Vacuum Sci. Tech. A, vol. 26, no. 4, pp. 739-744, JUL, 2008.
Abstract
"Process development and material characterization of polycrystalline BiTe and PbTe thin film alloys on Si for MEMS thermoelectric generators",
54th Int. Symp. Amer. Vacuum Society, Seattle, WA, OCT, 2007.
"Performance Modeling of Thermoelectric Generators as a Function of System Thermal Management",
PowerMEMS, Washington, DC, Technical Digest of the 9th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, 12/2009.
"Design of a tubular microfabricated power generation system for hot exhaust streams",
Tech. Dig. 7th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2007), Freiburg, Germany, pp. 249-252, November, 2007.
Abstract
"Integrated Power Inductors and Capacitors Enabled by a Multilevel Molding Process",
220th ECS Meeting, Boston, MA, ECS, pp. 331 - 340, 2011.
Abstract
"Integrated passive components for high frequency switching dc-dc power converters in microscale robots",
Intl. Workshop on Power Supply on Chip (Power SoC), Cork, Ireland, SEP, 2008.
"Multilayer Micromachined Air-Core Power Inductors and Transformers",
2nd International Workshop on Power Supply On Chip, Cork, Ireland, 10/2010.
"Influence of Layer Thickness on the Performance of Stacked Thick-Film Copper Air-Core Power Inductors",
IEEE Transactions on Magnetics, vol. 48, issue 11, pp. 4436 - 4439, 11/2012.
Abstract
"Micromachined thick-film copper power inductors and transformers for integrated power converters",
Solid-State Sensors, Actuators, and Microsystems Workshop (Hilton Head 2010), Hilton Head, SC, pp. 455-458, 06/2010.
Abstract
"High-Inductance-Density, Air-Core, Power Inductors, and Transformers Designed for Operation at 100–500 MHz",
IEEE Transactions on Magnetics, vol. 46, issue 6, pp. 2236 - 2239, 06/2010.
Abstract
"Ultra-miniaturized power converter modules using micromachined copper scaffolds",
Hilton Head 2012, Hilton Head Island, SC, 06/2012.
High inductance-density air-core power inductors and transformers designed for operation at 100–500 MHz,
, Washington, DC, 11th Joint MMM/Intermag Conf., 01/2010.
"Power for autonomous microsystems",
27th Army Science Conf., 5 pages, Orlando, FL, 11/2010.
Abstract
"Power considerations for MAST platforms",
Proc. SPIE Defense Security & Sensing Conf. (Micro- and Nanotechnology Sensors, Systems, and Applications II), vol. 7679, no. 76790V, 12 pages, Orlando, FL, 05/2010.
Abstract
"Micro-power requirements & conversion for autonomous microsystems",
NATO SET-150 Specialist Meeting on Energy Technologies & Management for Portable Power for Military Applications, Brdo pri Kranju, Slovenia, 05/2009.
"Towards miniature step-up power converters for mobile microsystems",
Applied Power Electronics Conf. & Exposition (APEC 2011), Fort Worth, TX, pp. 1451-1455, 03/2011.
Abstract
"A 100MHz 8x step-up dc-dc converter in 130nm 1.2V CMOS process with micro-fabricated air-core inductor",
2nd International Workshop on Power Supply On Chip, Cork, Ireland, 10/2010.
