] Filters: First Letter Of Last Name is A [Clear All Filters]
IUTAM Symposium on Flow Control and MEMS,
, vol. 7: Springer, pp. 25-32, Notice: Undefine, 2008.
Abstract
"A study of scaling and geometry effects on the forces between cuboidal and cylindrical magnets using analytical force solutions",
J. Phys. D: Appl. Phys., vol. 41, no. 10, pp. 105001-1–105001-9, MAY, 2008.
Abstract
"Development of Compact Electrodynamic Zero-Net Mass-Flux Actuators",
47th AIAA Aerospace Sciences Meeting, AIAA Paper 2009-1308, Orlando, FL, 01/2009.
Abstract
"Analytical force calculations and scaling effects for cylindrical and cuboidal micro-magnets",
Intermag 2006, San Diego, CA, MAY, 2006.
"Driving Fully-Adiabatic Logic Circuits Using Custom High-Q MEMS Resonators",
Proceedings of the 2004 International Conference on Embedded Systems and Applications (ESA’04), Las Vegas, Nevada, USA, 2004.
Abstract
Download: Driving Fully-Adiabatic Logic Circuits Using Custom High-Q MEMS Resonators.pdf (187.05 KB)
"Electromechanically Steerable Directional Antenna with Floating Pillar Array",
2010 IEEE International Symposium Antennas and Propagation and CNC/USNC/URSI Radio Science Meeting, Toronto, ON, Canada, IEEE, pp. 1 - 4, 07/2010.
"Validation of a Low Reynolds Number Aerodynamic Characterization Facility",
47th AIAA Aerospace Sciences Meeting, AIAA Paper 2009-0880, January, 2009.
Abstract
"Characterization of a High-Frequency Pressure-Field Calibration Method",
159th Meeting of the Acoustical Society of America, Baltimore, MD, 04/2010.
Abstract
"The art and science of flow control – case studies using flow visualization methods",
The European Physical Journal - Special Topics, vol. 182, issue 1, pp. 97-112, 04/2010.
Abstract
"Mixed Convection Induced by MEMS-Based Thermal Shear Stress Sensors",
Numerical Heat Transfer-A, vol. 43, no. 3, pp. 283-305, JUL, 2003.
Abstract
"Towards Effective ZNMF Jet Based Control of a Canonical Separated Flow",
5th AIAA Flow Control Conference, AIAA-2010-4705, Chicago, IL, AIAA, 06/2010.
"Toward Simple Boundary Condition Representations of Zero-Net Mass-Flux Actuators in Grazing Flow",
39th AIAA Fluid Dynamics Conference, AIAA Paper 2009-4018, San Antonio, TX, June, 2009.
Abstract
"Simple Representations of Zero-Net Mass-Flux Jets in Grazing Flow for Flow-Control Simulations",
International Journal of Flow Control, vol. 2, issue 2, pp. 109 - 125, 06/2010.
"Microscale magnetic power generation: past, present, and future (Invited)",
10th Joint MMM/Intermag Conf., Baltimore, MD, JAN, 2007.
"A directional acoustic array using silicon micromachined piezoresistive microphones",
J. Acous. Soc. Amer., vol. 113, no. 1, pp. 289-298, JAN, 2003.
Abstract
"A self-contained, flow-powered microgenerator system",
Tech. Dig. 5th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2005), Tokyo, Japan, pp. 113-115, November, 2005.
"Technology Development for Directional Acoustic Arrays",
142nd Meeting of the Acoustical Society of America, Ft. Lauderdale, FL, DEC, 2001.
"Analysis and optimization of vertically oriented, throughwafer, laminated magnetic cores in silicon",
J. Micromech. Microeng, vol. 15, no. 5, pp. 971-977, MAY, 2005.
"Magnetic induction machines embedded in fusion-bonded silicon",
Tech. Dig. Solid-State Sensor, Actuator, and MicrosystemsWorkshop (Hilton Head 2004), pp. 129-132, June, 2004.
"Review of microscale magnetic power generation",
IEEE Trans. Magn., vol. 43, no. 11, pp. 3940-3951, NOV, 2007.
Abstract
Micro-manufacturing technologies for sub-millimeter magnetic undulators,
, Newport News, VA, Future Light Sources Workshop 2012 (Undulator Working Group), 03/2012.
"MEMS-Based Acoustic Array Technology",
40th Aerospace Sciences Meeting and Exhibit, AIAA Paper 2002-0253, Reno, NV, January, 2002.
"Opportunities for vibrational energy harvesting using microscale magnetic devices (Invited)",
214th Electrochemical Society Meeting, Honolulu, HI, OCT, 2008.
"Microfabricated high-speed axial-flux multiwatt permanent-magnet generators - Part II: design, fabrication, and testing",
J. Microelectromech. Syst., vol. 15, no. 5, pp. 1351-1363, OCT, 2006.
"Optimization of a microscale, axial-flux, permanent-magnet generator",
Tech. Dig. 5th Int. Workshop Micro Nanotechnology For Power Generation and Energy Conversion Apps. (PowerMEMS 2005), Tokyo, Japan, pp. 165-168, November, 2005.
"Fabrication of Microscale Rotating Magnetic Machines",
Multi-Wafer Rotating MEMS Machines: Turbines, Generators, and Engines, New York, Springer, pp. 157-190, 2009.
Abstract
"Vertically-laminated magnetic cores by electroplating Ni-Fe into micromachined Si",
9th Joint MMM-Intermag Conf., Anaheim, CA, JAN, 2004.
"Electroplated metal microstructures embedded in fusion-bonded silicon: conductors and magnetic materials",
J. Microelectromech. Syst., vol. 13, no. 5, pp. 791-798, OCT, 2004.
"Second-generation, silicon-based magnetic induction machines for microengine power generation",
Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, Washington, DC, May, 2004.
"A Piezoresistive Microphone for Aeroacoustic Measurements",
Proc. of ASME IMECE 2001, International Mechanical Engineering Congress and Exposition, Paper MEMS-23841, vol. 2, New York, NY, November, 2001.
"Magnetic induction machines integrated into bulk-micromachined silicon",
J. Microelectromech. Syst., vol. 15, no. 2, pp. 406-414, APR, 2006.
"Additive Processes for Metals",
MEMS Materials and Processes Handbook, New York, Springer, pp. 137-191, 2011.
Abstract
"Vertically-laminated magnetic cores by electroplating Ni-Fe into micromachined Si",
IEEE Trans. Magn., vol. 40, no. 4, pp. 3060-3062, JUL, 2004.
"Materials and fabrication methods for high-temperature micro-magnetic machines for micro-turbine power generation",
Proc. Army Research Lab Collaborative Technology Alliances Conf., Power and Energy, College Park, MD, pp. 77-81, April, 2003.
"Permanent Magnets for MEMS",
J. Microelectromech. Syst., vol. 18, no. 6, pp. 1255-1266, 12/2009.
Abstract
"High-speed characterization and mechanical modeling of microscale, axial-flux, permanent-magnet generators",
13th International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers 05), vol. 1, Seoul, Korea, pp. 701-704, June, 2005.
"Design optimization of an 8-Watt, microscale, axial-flux, permanent-magnet generator",
J. Micromech. Microeng., vol. 16, no. 9, pp. s290-s296, SEP, 2006.
"Towards Adaptive Closed-Loop Control of Transonic Cavity Flows",
4th Flow Control Conference, AIAA 2008-3861: AIAA, 06/2008.
Abstract
"Modeling of Zero-Net Mass-Flux Actuators for Feedback Flow Control",
47th AIAA Aerospace Sciences Meeting, AIAA Paper 2009-0743, January, 2009.
Abstract
