Projects of IMG
Current (40) Archived (17)
Current Projects
- Acoustics and Fluid Mechanics
- Actuator Technologies
- Aeroacoustics
- Acoustic Characteristics of a Steady Circulation Control Airfoil
- Aeroacoustic Characterization and Noise Reduction Technology Development for Wind Turbine Airfoils
- Aeroacoustic piezoresistive microphone
- An Experimental Investigation of Three-Dimensional Trailing Edge Noise
- Anechoic Wind Tunnel for Airframe Noise Studies
- Characterization of Aircraft Landing Gear Noise Generation
- Flow-Induced Cavity Oscillations
- Unsteady Circulation Control for High-Performance, Low-Noise Aircraft
- Flow Control
- Anechoic Wind Tunnel for Airframe Noise Studies
- Characterization of Zero-Net Mass-Flux Actuator
- Development of Advanced Zero-Net Mass-Flux Actuators
- Flow-Induced Cavity Oscillations
- High Reynolds Number Separation Flow Control Using ZNMF Devices
- Unsteady Circulation Control for High-Performance, Low-Noise Aircraft
- Measurement Technologies
- Microfluidics
- Ultrasonics
- Chemical and Biomedical Systems
- Power and Energy Systems
- Transducer Technologies
- Assembly/Packaging
- Energy Harvesters
- Fabrication Technologies
- Fundamental Physics
- Microactuators
- Microsensors
- A MEMS Piezoelectric Microphone for Aeroacoustics Applications
- Anechoic Wind Tunnel for Airframe Noise Studies
- High Reynolds Number Separation Flow Control Using ZNMF Devices
- Noise in P-type Piezoresistor
- Optical Shear Stress Sensor
- Piezoresistive Shear Stress Sensor
- Wireless Shear-Stress Sensor Array Measurement Technology
- Nano Technologies
- Transducer Modeling
Archived Projects
- Acoustics and Fluid Mechanics
- Actuator Technologies
- Closed-Loop Flow Separation Control Using Zero-Net-Mass-Flux Devices
- Design Tools for Zero-Net Mass Flux Actuators
- Experimental Investigation of Flows from Zero-Net Mass-Flux Devices
- Lumped Element Modeling of Synthetic Jets
- MEMS Optical Microphone
- Modeling and Design of Piezoelectric Driven Actuators for Flow Control
- Aeroacoustics
- Flow Control
- Closed-Loop Flow Separation Control Using Zero-Net-Mass-Flux Devices
- Design Tools for Zero-Net Mass Flux Actuators
- Experimental Investigation of Flows from Zero-Net Mass-Flux Devices
- Lumped Element Modeling of Synthetic Jets
- Modeling and Design of Piezoelectric Driven Actuators for Flow Control
- Thermal Shear Stress Sensor
- Measurement Technologies
- Microfluidics
- Ultrasonics
- Actuator Technologies
- Chemical and Biomedical Systems
- Power and Energy Systems
- Transducer Technologies
- Assembly/Packaging
- Energy Harvesters
- Electromechanical Acoustic Liner Technology
- Energy Reclamation via Piezoelectrics for Acoustic Signature Reduction
- MEMS based piezoelectric cantilever arrays for vibrational energy reclamation
- Modeling of Electrodynamic Vibrational Energy Harvesters
- Thermoelectric Devices for Waste Heat Power Recovery and Generation
- Fabrication Technologies
- Fundamental Physics
- Microactuators
- Microsensors
- Nano Technologies
- Transducer Modeling
- Assembly/Packaging

