IMG Publications

Export 738 results:
Sort by: Author Title [ Type  (Asc)] Year
Conference Abstract
M. Sheplak, "Aerodynamic Sensors Using Silicon Nitride Wafer-Bonding Technology", First International Conference on Compliant and Alternative Substrate Technology, Orlando, FL, SEP, 1999.
C. Bahr, T. Yardibi, F. Liu, and L. Cattafesta, "Analysis of Coherent Power Techniques", 157th Meeting of the Acoustical Society of America, Portland, OR, vol. 125, no. 4, pp. 2538, MAY, 2009. Abstract
C. D. Meyer, S. S. Bedair, B. C. Morgan, J. Pulskamp, R. Polcawich, N. Lazarus, L. Xue, C. M. Dougherty, R. Bashirullah, and D. P. Arnold, Chip scale power management for autonomous systems,, , San Francisco, CA, 3nd International Workshop on Power Supply on Chip (Power SoC 2010), 11/2012.
X. Li, J. Li, and M. Sheplak, "CW-based Proximity Distance Measurement by Ultrasonic Sensors", 142nd Meeting of the Acoustical Society of America, Ft. Lauderdale, FL, DEC, 2001.
J. Mathew, C. Bahr, B. Carroll, M. Sheplak, and L. Cattafesta, "Design and Characterization of an Anechoic Aeroacoustic Facility", 150th Meeting of the Acoustical Society of America, Minneapolis, MN, vol. 118, no. 3, pp. 1943, OCT, 2005. Abstract
I. Boniche, S. Masilamani, R. Durscher, B. Morgan, and D. P. Arnold, "Design and Optimization of a Miniaturized Thermoelectric Generator Using Micromachined Silicon Substrates", 27th Intern. Conf. on Thermoelectrics Book of Abstracts ICT 2008, Corvallis, OR, pp. 65-66, AUG, 2008.
D. Martin, J. Liu, K. Kadirvel, R. Fox, M. Sheplak, and T. Nishida, "Dual-Backplate Capacitive Aeroacoustic Microphone", 150th Meeting of the Acoustical Society of America, Minneapolis, MN, OCT, 2005.
M. Sheplak, A. Padmanabhan, M. Schmidt, S. Lee, and K. Breuer, "Dynamic Calibration of a Shear-Stress Sensor by Acoustic Waves", 49th Annual Meeting of APS Division of Fluid Dynamics, Syracuse, NY, NOV, 1996.
M. Sheplak, E. Spina, C. McGinley, and M. Kegerise, "Dynamic Characterization of a Hot-Film Probe for Hypersonic Turbulence Measurements", 47th Annual Meeting of APS Division of Fluid Dynamics, Atlanta, GA, NOV, 1994.
O. D. Oniku, P. V. Ryiz, B. Qi, and D. P. Arnold, Electroplated L10 CoPt thick-film permanent magnets, , Denver, CO, 58th Conference on Magnetism and Magnetic Materials, 11/2013.
B. A. Griffin, M. Sheplak, and T. Schmitz, "High Temperature Direct Shear Stress and Pressure Sensors", NEMS/MEMS Workshop at Redstone Arsenal, Huntsville, AL, 09/2009. Abstract
S. Horowitz, T. Nishida, L. Cattafesta, and M. Sheplak, "Impedance tuning of an electromechanical acoustic liner", presentation at the 142nd Meeting of the Acoustic Society of America, The Journal of the Acoustical Society of America, vol. 110, no. 5, pp. 2773, NOV, 2001.
Z. Xia, L. Cattafesta, R. Mei, M. Sheplak, and Z. Fan, "Investigation of Fluid Mixing in Channels with Microfabricated Ridges", 2006 59th Annual Meeting of the APS Division of Fluid Dynamics, Tampa Bay, FL, NOV, 2006.
M. Sheplak, and J. Dugundji, "Large Deflections of Clamped Circular Plates Under Tension and Transitions to Membrane Behavior", Thirteenth U.S. National Congress of Applied Mechanics, Gainesville, FL, JUN, 1998.
K. Jia, and H. Xie, "A Low-Voltage, Multi-Axis Scanning Electrothermal Micromirror", Optics in the Southeast Session 2: Optical Imaging and Sensing, pp. 75, SEP, 2006.
J. Dobson, E. Yarmola, Z. A. Kaufman, D. P. Arnold, and K. D. Allen, Magnetic biomarker harvesting for osteoarthritis diagnosis, , Atlanta, GA, 2012 Biomedical Engineering Society Annual Meeting, 10/2012.
S. Shetye, I. Eskinazi, and D. P. Arnold, Magnetic self-assembly of chip-scale components, , Scottsdale, Arizona, 5th Int. Conf. and Exhibition on Device Packaging (IMAPS), 03/2009.
S. Shetye, J. Agashe, and D. P. Arnold, "Magnetic self-assembly of small parts", 2006 NSF Design, Service and Manufacturing Grantees and Research Conf., St. Louis, MO, JUN, 2006.
L. Cattafesta, D. P. Arnold, and M. Sheplak, "Measurement needs and challenges for the characterization of flow control actuators", 25th AIAA Aerodynamic Measurement Technology and Ground Testing Conf., San Francisco, CA, JUN, 2006.
D. P. Arnold, M. G. Allen, and F. Herrault, Micro-manufacturing technologies for sub-millimeter magnetic undulators, , Newport News, VA, Future Light Sources Workshop 2012 (Undulator Working Group), 03/2012.