Home | Publications

IMG Publications

ListFilter
Export 717 results:
Sort by: Author Title Type [ Year (Desc)]
2009
H. Chen, and H. Z. Fan, "Two-dimensional protein separation in microfluidic devices", ELECTROPHORESIS, vol. 30, issue 5, pp. 758 - 765, 03/2009.
J. A. Phillips, Y. Xu, Z. Xia, H. Z. Fan, and W. Tan, "Enrichment of Cancer Cells Using Aptamers Immobilized on a Microfluidic Channel", Analytical Chemistry, vol. 81, issue 3, pp. 1033 - 1039, 02/2009.
J. Kim, K. Lee, K. W. Oh, and Y. K. Yoon, "Adjustable refractive index method for complex microstructures by automated dynamic mode multidirectional UV lithography", International Conference of IEEE Micro Electro Mechanical Systems, Sorrento, Italy, 01/2009.
R. Khnouf, D. J. Beebe, and H. Z. Fan, "Cell-free protein expression in a microchannel array with passive pumping", Lab on a Chip, vol. 9, issue 1, pp. 56-61, 01/2009.
V. Chandrasekharan, J. Sells, D. P. Arnold, and M. Sheplak, "Characterization of a MEMS-Based Floating Element Shear Stress Sensor", 47th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2009-316, Orlando, FL, 01/2009. Abstract
J. Agashe, D. P. Arnold, and L. Cattafesta, "Development of Compact Electrodynamic Zero-Net Mass-Flux Actuators", 47th AIAA Aerospace Sciences Meeting, AIAA Paper 2009-1308, Orlando, FL, 01/2009. Abstract
J. K. Kim, S. Y. Cha, T. S. Yun, and Y. K. Yoon, "2.45 GHz Inter-/Intra Board Wireless Communication using a CPW-fed Vertical Bow-tie Antenna", Microwave and Optical Technology Letters, vol. 51, no. 1, 2009.
H. Xie, "3-D Endoscopic Optical Coherence Tomography Based on Rapid-Scanning MEMS Mirrors", 2009 Asia Communications and Photonics Conference and Exhibition, Shanghai, China, 2009.
S. Guo, A. Pozzi, C. Ling, J. Sun, L. Wu, L. Liu, and H. Xie, "3D Polarization-Sensitive Optical Coherence Tomography of Canine Meniscus Based on a 2D High-Fill-Factor Microelectromechanical Mirror", 31st Annual International Conference of the IEEE Engineering in Medicine and Biology Society , Minneapolis, MN, 2009.
T-S. Yun, Y. K. Yoon, B. Lee, J-J. Choi, J-Y. Kim, and J-C. Lee, "Analysis and Design of Stub Bandpass Filter Using Tapped-line Geometry", Microwave and Optical technology Letters, vol. 51, 2009.
Y. Zhou, J. Johnson, A. Ural, and H. Xie, "Carbon nanotube-cmos integration based on a maskless post-CMOS process", Proc. of the Nanoelectronic Devices for Defense & Security (NANO-DDS) Conference, Fort Lauderdale, FL, 2009.
K. Jia, S. Pal, L. Wu, D. Hamilton, and H. Xie, "Dental optical coherence tomography employing miniaturized MEMS-based imaging probe", Optical MEMS and Nanophotonics, 2009 IEEE/LEOS International Conference on, pp. 1 -2, 2009. Abstract
K. Jia, S. Pal, and H. Xie, "An Electrothermal Tip-Tilt-Piston Micromirror Based on Folded Dual S-Shaped Bimorphs", Microelectromechanical Systems, Journal of, vol. 18, no. 5, pp. 1004 -1015, 2009. Abstract
D. P. Arnold, and M. G. Allen, "Fabrication of Microscale Rotating Magnetic Machines", Multi-Wafer Rotating MEMS Machines: Turbines, Generators, and Engines, New York, Springer, pp. 157-190, 2009. Abstract
L. Wu, and H. Xie, "Large-aperture, rapid scanning MEMS micromirrors for free-space optical communications", Optical MEMS and Nanophotonics, 2009 IEEE/LEOS International Conference on, pp. 131 -132, 2009.
H. Xie, S. Guo, J. Sun, L. Liu, and L. Wu, "MEMS-Based 3D Optical Microendoscopy", 31st Annual International Conference of the IEEE Engineering in Medicine and Biology Society , Minneapolis, MN, 2009.
L. Wu, A. Pais, S. R. Samuelson, S. Guo, and H. Xie, "A Miniature Fourier Transform Spectrometer by a Large-Vertical-Displacement Microelectromechanical Mirror", Fourier Transform Spectroscopy: Optical Society of America, pp. FWD4, 2009.
D. Morrish, L. Wu, H. Xie, J. Reynolds, A. Boussioutas, and M. Gu, "Nonlinear Imaging by an Endoscope Probe Incorporating a Tip-Tilt-Piston Microelectromechanical System Mirror", Novel Techniques in Microscopy: Optical Society of America, pp. NWD1, 2009.
A. Pozzi, H. Y. Ling, C. A. Tonks, B. T. Wise, S. Guo, K. M. Thieman, and H. Xie, "Optical coherence tomography for diagnosing meniscal pathology in dogs: a pilot study", Veterinary Orthopedic Society Annual Meeting, Steamboat, CO, 2009.
S. Lee, J. Sun, H. Xie, and M. Sarntinoranont, "An Optically-Based Indentation Technique for Thin Soft Biomaterials", 2009 Biomedical Engineering Society Annual Fall Meeting, Pittsburgh, PA, 2009.
S. Pal, and H. Xie, "A parametric dynamic compact thermal model of an electrothermally actuated micromirror", Journal of Micromechanics and Microengineering, vol. 19, no. 6, pp. 065007, 2009. Abstract
H. Ling, S. Guo, K. M. Thieman, B. T. Wise, A. Pozzi, H. Xie, and M. Horodyski, "The potential of optical coherence tomography in meniscal tear characterization", Photonics West 2009, San Francisco, California, 2009.
S. Pal, and H. Xie, "Repeatability study of an electrothermally actuated micromirror", Reliability Physics Symposium, 2009 IEEE International, Montreal, QC, pp. 549 -556, 2009. Abstract
L. Wu, and H. Xie, "A scanning micromirror with stationary rotation axis and dual reflective surfaces for 360° forward-view endoscopic imaging", Solid-State Sensors, Actuators and Microsystems Conference, 2009. TRANSDUCERS 2009. International, Denver, CO, USA, IEEE, pp. 2222 -2225, 2009.
Y. Zhao, Y. K. Yoon, S. O. Choi, X. Wu, Z. Liu, and M. G. Allen, "Three dimensional metal pattern transfer for replica molded microstructures", Applied Physics Letters, vol. 94, no. 2, 2009.
S. Guo, L. Wu, J. Sun, L. Liu, and H. Xie, "Three-Dimensional Optical Coherence Tomography Based on a High-Fill-Factor Microelectromechanical Mirror", Novel Techniques in Microscopy: Optical Society of America, pp. NTuB3, 2009.
L. Wu, and H. Xie, "A tunable microlens with 0.9 mm scan range and small lateral shift", Optical MEMS and Nanophotonics, 2009 IEEE/LEOS International Conference on, pp. 69 -70, 2009.
2008
C. D. Meyer, A. Sopeju, C. Dougherty, L. Xue, P. Li, R. Bashirullah, and D. P. Arnold, "Integrated passive components for high frequency switching dc-dc power converters in microscale robots", Intl. Workshop on Power Supply on Chip (Power SoC), Cork, Ireland, SEP, 2008.
M. Papila, M. Sheplak, and L. Cattafesta, "Optimization of Clamped Circular Piezoelectric Composite Actuators", Sensors & Actuators A, vol. 147, no. 1, pp. 310-323, SEP, 2008. Abstract
J. Sanchez, J. Principe, T. Nishida, R. Bashirullah, J. Harris, and J. Fortes, "Technology and Signal Processing for Brain-Machine Interfaces", IEEE Signal Processing Magazine, vol. 25, pp. 29-40, SEP, 2008.
S. Suthram, Y. Sun, P. Majhi, I. Ok, H. Kim, H. R. Harris, N. Goel, S. Parthasarathy, A. Koehler, A. Acosta, et al., "Strain Additivity in III-V Channels for CMOSFETs beyond 22nm Technology Node", 2008 VLSI Symposium on VLSI Technology, pp. 182-183, October, 2008.
D. P. Arnold, "Opportunities for vibrational energy harvesting using microscale magnetic devices (Invited)", 214th Electrochemical Society Meeting, Honolulu, HI, OCT, 2008.
S. Y. Son, Y. Choi, P. Kumar, H. W. Park, T. Nishida, R. K. Singh, and S. Thompson, "Strain induced changes in gate leakage current and dielectric constant of nitrided Hf-silicate metal oxide semiconductor capacitors", Appl. Phys. Lett., vol. 93, pp. 153505-1–153505-3, OCT, 2008.
M. D. Williams, J. Zito, J. Agashe, A. Sopeju, and D. P. Arnold, "Design of an Electrodynamically Actuated Microvalve Using COMSOL Multiphysics and MATLAB", COMSOL Conference, Hannover, Germany, November, 2008. Abstract
S. Cheng, and D. P. Arnold, "A Multi-Pole Magnetic Generator with Enhanced Voltage Output for Low-Frequency Vibrational Energy Harvesting", Tech. Dig. 8th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (PowerMEMS 2008), Sendai Japan, pp. 125-128, November, 2008. Abstract
B. Bowers, and D. P. Arnold, "Spherical Magnetic Generators for Bio-Motional Energy Harvesting", Tech. Dig. 8th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Apps. (Power MEMS 2008), Sendai, Japan, pp. 281-284, November, 2008. Abstract
M. Wang, K. Ngo, and H. Xie, "SU8 Enhanced High Power Density MEMS Inductors", Proc. of the 34th Annual Conference of the IEEE Industrial Electronics Society (IECON’08), Orlando, FL, USA, Nov. 10-13, 2008.
F. Herrault, D. P. Arnold, I. Zana, P. Galle, and M. Allen, "High temperature operation of multi-watt, axial-flux, permanent-magnet microgenerators", Sensors & Actuators A, vol. 148, pp. 299-305, NOV, 2008. Abstract
S. Shetye, I. Eskinazi, and D. P. Arnold, "Self-assembly of millimeter-scale components using integrated micromagnets", IEEE Trans. Magn., vol. 44, no. 11, pp. 4293-4296, NOV, 2008. Abstract
J. Agashe, M. Sheplak, D. P. Arnold, and L. Cattafesta, IUTAM Symposium on Flow Control and MEMS, , vol. 7: Springer, pp. 25-32, Notice: Undefine, 2008. Abstract
C. Bahr, T. Yardibi, F. Liu, and L. Cattafesta, "An Analysis of Different Measurement Techniques for Airfoil Trailing Edge Noise", 14th AIAA/CEAS Aeroacoustics Conference, AIAA Paper 2008-2957, Vancouver, Canada, May, 2008. Abstract  Download: AIAA-2008-2957.pdf (1.88 MB)
N. Wang, and D. P. Arnold, "Electroplated Co-rich CoPt thick films and patterned arrays for magnetic MEMS", Intermag 2008, Madrid, Spain, MAY, 2008.
S. Shetye, and D. P. Arnold, "Self-assembly of millimeter-scale components using integrated micromagnets", Intermag Conf. 2008, Madrid, Spain, MAY, 2008. Abstract
T. Yardibi, J. Li, P. Stoica, and L. Cattafesta, "Sparsity Constrained Deconvolution Approaches for Acoustic Source Mapping", J. Acous. Soc. Amer., vol. 123, no. 5, pp. 2631-2642, MAY, 2008. Abstract
J. Agashe, and D. P. Arnold, "A study of scaling and geometry effects on the forces between cuboidal and cylindrical magnets using analytical force solutions", J. Phys. D: Appl. Phys., vol. 41, no. 10, pp. 105001-1–105001-9, MAY, 2008. Abstract
C. Walker, Z. Xia, Z. Foster, B. Lutz, and Z. Fan, "Electrode Fabrication in Plastic Microfluidic Devices for Hydrogen Detection", Electroanalysis, vol. 20, no. 6, pp. 663-670, MAR, 2008. Abstract
Y. Choi, T. Numata, T. Nishida, R. Harris, and S. Thompson, "Impact of mechanical stress on gate tunneling currents of germanium and silicon p-type metal-oxide-semiconductor field-effect transistors and metal gate work function", J. Appl. Phys., vol. 103, pp. 064510-1–065410-5, MAR, 2008.
Y. Li, V. Chandrasekharan, B. Bertolucci, T. Nishida, L. Cattafesta, D. P. Arnold, and M. Sheplak, "A laterally-implanted piezoresistive skin-friction sensor", Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head, SC, pp. 304-307, June, 2008. Abstract
D. Martin, K. Kadirvel, T. Nishida, and M. Sheplak, "A Surface Micromachined Capacitive Microphone for Aeroacoustic Applications", Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head, SC, June, 2008. Abstract
M. Chu, T. Nishida, X. Lu, N. Mohta, and S. Thompson, "Comparison between high-field piezoresistive coefficients of Si metal-oxide-semiconductor field-effect transistors and bulk Si under uniaxial and biaxial stress", J. Appl. Phys., vol. 103, pp. 113704-1–113704-7, JUN, 2008.